2014 Nissan Murano Owner's Manual - Page 507
2014 Nissan Murano Manual
Page 507 highlights
GAS STATION INFORMATION FUEL RECOMMENDATION: Hardtop models Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) number (Research octane number 91). . CrossCabriolet models NISSAN recommends the use of unleaded premium gasoline with an octane rating of at least 91 AKI (Anti-Knock Index) number (Research octane number 96). If unleaded premium gasoline is not available, you may use unleaded regular gasoline with an octane rating of at least 87 AKI number (Research octane number 91), but you may notice a decrease in performance. Do not use E-15 or E-85 fuel in your vehicle. Your vehicle is not designed to run on E-15 or E-85 fuel. Using E15 or E-85 fuel in a vehicle not specifically designed for E-15 or E85 fuel can adversely affect the emission control devices and systems of the vehicle. Damage caused by such fuel is not covered by the NISSAN new vehicle limited warranty. U.S. government regulations require ethanol dispensing pumps to be identified by a small, square, orange and black label with the common abbreviation or the appropriate percentage for that region. recommendation. COLD TIRE PRESSURES: The label is typically located on the driver side center pillar or on the driver's door. For additional information, see "Wheels and tires" in the "8. Maintenance and do-it-yourself" section. NEW VEHICLE BREAK-IN PROCEDURES RECOMMENDATION: During the first 1,200 miles (2,000 km) of vehicle use, follow the recommendations outlined in the "Break-in schedule" in the "5. Starting and driving" section of this Owner's Manual. Follow these recommendations for the future reliability and economy of your new vehicle. . CAUTION . Using a fuel other than that specified could adversely affect the emission control system, and may also affect warranty coverage. Under no circumstances should a leaded gasoline be used, because this will damage the three-way catalyst. For additional information, see "Capacities and recommended fuel/lubricants" in the "9. Technical and consumer information" section. ENGINE OIL RECOMMENDATION: . Engine oil with API Certification Mark . Viscosity SAE 5W-30 See "Capacities and recommended fuel/lubricants" in the "9. Technical and consumer information" section for engine oil and oil filter .