1998 Pontiac Sunfire Owner's Manual - Page 281

Back-up Lamps (Sedan) If you have a four-door sedan, do the following to replace a back-up lamp. 1. Use a torx screwdriver to unscrew the back-up lamp assembly from the fascia. 2. Gently pull the bulb assembly from the fascia. 3. Remove the bulb from the socket by turning it one-quarter turn to the left. 4. Replace the bulb and bulb assembly by reversing these steps. 3. To remove the bulb, pull it out. 4. Push in a new bulb. 5. Reverse all steps to replace the taillamp assembly. Back-up Lamps (Coupe) If you have a two-door coupe, do the following to replace a back-up lamp: 1. Open the trunk lid and locate the back-up lamp assembly on the trunk lid. 2. Gently remove the bulb from the socket by turning it to the left and pulling it out. 3. Replace the bulb in the socket by aligning the tabs and turning it to the right.