2010 Pontiac Vibe Owner's Manual - Page 124

6-10 Infotainment System INFO (Information): Press to switch the display between the track number, elapsed time of the track, and the time. When the ignition is off, press this button to display the time. EQ (Equalization): Press to select an equalization setting while playing a CD. See "EQ" listed previously for more information. If an EQ setting is selected for a CD, it is activated each time a CD is played. Care of CDs The sound quality of the CD player can be reduced because of: Store CD-R(s) in their original cases or other protective cases and away from dust and direct sunlight. The CD player scans the bottom surface of the disc. If the surface of a CD is damaged, such as cracked, broken, or scratched, the CD may not play properly or at all. Do not touch the bottom side of a CD while handling it; this could damage the surface. Pick up CDs by grasping the outer edges or the edge of the hole and the outer edge. To clean a CD, use a soft lint free cloth, or dampen a clean soft cloth in a mild neutral detergent solution mixed with water. Wipe the CD from the center to the edge. ( FWD REV ) (Fast Forward/ Fast Reverse): Press and hold ( to advance playback quickly within a track. Release to resume playing the track. Press and hold ) to reverse playback quickly within a track. Release to resume playing the track. BAND: Press to listen to the radio when a CD is playing. CD/AUX (CD/Auxiliary): Press to play a CD when listening to the radio. Press the CD/AUX button again and the system begins playing audio from the connected portable audio player. If a portable audio player is not connected, "No Aux Input Device" displays. See "Using the Auxiliary Input Jack" later in this section. • The CD-R quality. • The method of recording the CD-R. • The quality of the music that has been recorded on the CD-R. • The way the CD-R has been handled.