3Com 3C17300A Implementation Guide - Page 32
Aggregated Link Example, the 1000BASE-T port marked 'Down' on the lower Switch.
UPC - 662705493169
View all 3Com 3C17300A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
32 CHAPTER 2: OPTIMIZING BANDWIDTH Aggregated Link The example shown in Figure 5 illustrates an 4 Gbps aggregated link Example between two Switch units. Figure 5 A 4 Gbps aggregated link between two Switch units Switch 4200 28-Port 4 Gbps Aggregated Link Switch 4200 28-Port To set up this configuration: 1 Add the 1000BASE-T ports on the upper unit to the aggregated link. 2 Add the 1000BASE-T ports on the lower unit to the aggregated link. 3 Add the SFP ports on the upper unit to the aggregated link. 4 Add the SFP ports on the lower unit to the aggregated link. 5 Connect the 1000BASE-T port marked 'Up' on the upper Switch to the 1000BASE-T port marked 'Up' on the lower Switch. 6 Connect the 1000BASE-T port marked 'Down' on the upper Switch to the 1000BASE-T port marked 'Down' on the lower Switch. 7 Connect the SFP port marked '27' on the upper Switch to the SFP port marked '27' on the lower Switch. 8 Connect the SFP port marked '28' on the upper Switch to the SFP port marked '28' on the lower Switch.