3Com 3C888 User Guide - Page 35
Windows NT 4.0, The Select Network Protocol dialog box appears.
UPC - 662705326443
View all 3Com 3C888 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Adding TCP/IP to Your Protocols List 35 The Select Network Protocol dialog box appears. Figure 18 Select Network Protocol Dialog Box 4 From the Manufacturers list box, select Microsoft, and then from the Network Protocols list box, select TCP/IP. 5 Click OK to exit the Select Network Protocol Dialog box. 6 Click OK again to exit the Network Dialog box. You may be prompted to re-boot your workstation. 7 Run the EZ-LAN Wizard again to optimize the settings on your workstation. Windows NT 4.0 To add TCP/IP to your protocols list for Windows NT 4.0: You may need your Windows NT 4.0 installation CD-ROM. 1 From the Control Panel, double-click Network. The Network dialog box appears.
Adding TCP/IP to Your Protocols List
35
The Select Network Protocol dialog box appears.
Figure 18
Select Network Protocol Dialog Box
4
From the Manufacturers list box, select
Microsoft
, and then from the Network
Protocols list box, select
TCP/IP
.
5
Click
OK
to exit the Select Network Protocol Dialog box.
6
Click
OK
again to exit the Network Dialog box.
You may be prompted to re-boot your workstation.
7
Run the EZ-LAN Wizard again to optimize the settings on your workstation.
Windows NT 4.0
To add TCP/IP to your protocols list for Windows NT 4.0:
You may need your Windows NT 4.0 installation CD-ROM.
1
From the Control Panel, double-click
Network
.
The Network dialog box appears.