3Com 3C888 User Guide - Page 52
Changing the LAN Modem IP Address for Static IP Users, The LAN Modem Support Web Site
UPC - 662705326443
View all 3Com 3C888 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
52 CHAPTER 5: CONFIGURING THE DUAL 56K LAN MODEM FOR INTERNET ACCESS The LAN Modem Support Web Site From the LAN Modem Support web site, you can register your Dual 56K LAN Modem, read any new and up-to-date information about your product, and perform firmware upgrades to the LAN Modem as they become available. To access this LAN Modem Support web site at any time, go to: http://www.3com.com/support/docs/lanmodem/. The call to your ISP established via the ISP Wizard will automatically disconnect after seven minutes of inactivity. (This is a default value and can be changed. Refer to Chapter 7, "Changing Data Call Parameters," for instructions.) To manually disconnect this call, refer to Chapter 5 "Disconnecting Calls". If you are setting up a statically-configured workstation, continue with "Changing the LAN Modem IP Address for Static IP Users" below. If you experience any other problems, refer to Chapter 10, "Troubleshooting and Maintenance." You can now connect up to three more computers and/or printers directly to your new LAN. To add more than four users using an external hub, refer to "Connecting an External Hub to the Dual 56K LAN Modem," page 56. Changing the LAN Modem IP Address for Static IP Users If you followed the steps in Chapter 3 "Changing the LAN Modem IP Address for Static IP Users", and chose to follow the manual setup procedure for static IP addressing (as opposed to using the EZ-LAN Wizard, as described in the Getting Started Guide), you must now change the LAN Modem's default IP address to recognize your statically configured workstation. The following steps explain how this is done. 1 Access the LAN Modem's main page by entering the following URL in your Web browser: http://3com.oc.lanmodem. Alternatively, you can use the numeric form of this same IP address: http://192.168.1.1. 2 From the Dual 56K LAN Modem's main configuration page, click the LAN Parameters icon. The LAN (Ethernet) Parameters page appears. 3 In the IP Address field, enter your workstation's original Gateway IP address that you recorded as part of the step sequence under "Setting Up Your Computer If You Have a Static IP Address." 4 Click Submit. The Dual 56K LAN Modem resets itself. 5 Quit your Web browser. 6 Reset your workstation back to the original network settings you recorded in Chapter 3, "Setting Up Your Computer If You Have a Static IP Address." 7 Restart your workstation. This completes the setup procedure for using a statically configured workstation with the LAN Modem.