3Com 3C888 User Guide - Page 48
guration Steps, static IP addressing
UPC - 662705326443
View all 3Com 3C888 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
48 CHAPTER 5: CONFIGURING THE DUAL 56K LAN MODEM FOR INTERNET ACCESS In addition, you should have the following information ready as you go through the configuration: s Your Analog Telephone Number or Numbers s ISP Telephone Number s ISP User ID and Password s ISP DNS Address (required only if your ISP does not use dynamic IP addressing) s (Optional) Call Waiting Disable Command (your telephone company can provide you with this value) Configuration Steps The following steps guide you through configuration of the Dual 56K LAN Modem for shared Internet access. If you ran the computer pre-checks in Chapter 3 and found that your computer was set up for static IP addressing, and you chose to follow the manual setup procedure for Static IP addressing, (as opposed to using the EZ-LAN Wizard, as described in the Getting Started Guide) refer to the section "Changing the LAN Modem IP Address for Static IP Users" on page 52 once you have completed these initial configuration steps. 1 Launch the Web browser on the computer that you attached to the LAN Modem during the installation. Regardless of the start page to which your Web browser is set, your Web browser will go to the Dual 56K LAN Modem's initial configuration welcome window. A welcome message appears, as shown in Figure 30. Figure 30 Initial Configuration Welcome Window 2 Click the Continue link. A message box appears indicating that the LAN Modem clock is being synchronized to the date and time on your computer.