3Com 3CBLSG48 User Guide - Page 215
ipSetup, Syntax, Parameters, Default Configuration, User Guidelines, Example
UPC - 662705518947
View all 3Com 3CBLSG48 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 215 highlights
204 appendix E: 3CoM CLI REFERENCE GUIDE ipSetup The ipSetup command allows the user to define an IP address on the device either manually or via a DHCP server. Syntax ipSetup Parameters auto - Specifies the IP address is acquired automatically from the Dynamic Host Configuration Protocol (DHCP) server. manual - Specifies the IP address. ip-address mask- Specifies that the IP address anddefault gateway are configured manually by the user (Range: 0.0.0.0. - 223.255.255.255). Default Configuration No default IP address is defined for interfaces. User Guidelines IP Addresses configured beyond the range of 224.0.0.0 are defined as multicast, experimental or broadcast addresses. If a default gateway is configured manually, the IP-address and mask are required to be the same as the gateway-address and mask. Example The following example displays an IP address configured manually: IpSetup Enter configuration method(auto,manual): Enter Ip address [169.254.3.64]: Enter subnet mask [255.255.255.0]: Enter gateway IP address [192.168.1.254] manual 192.168.1.1 255.255.255.0 192.168.1.254 The following example displays an IP address obtained via a DHCP server: ipSetup Enter configuration method (auto,manual): auto