3Com 3CRWDR101A-75 Installation Guide - Page 4
Front Panel - problems
View all 3Com 3CRWDR101A-75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
2 Front Panel FRONT PANEL 2 4 1 3 5 6 3CRWDR101A-75 OfficeConnect ADSL Wireless 54 Mbps 11g Firewall Router Alert Power SYNC Online WLAN LAN Status 12 34 Green = Link, Flash = Activity 1. Alert LED amber This LED has a number of functions: • It will flash rapidly during the power up self test. If it then remains on the unit self test has failed (refer to the User Guide). • It will flash rapidly during software upgrade. • It will flash rapidly during the reset to Factory defaults. If the reset button on the rear panel has been used to reset the unit to Factory defaults the Alert LED will then slow flash until power is removed. • It will flash on for 2 seconds when the firewall detects a hacker attack. 2. Power LED green If the LED is on, it indicates that the Router is powered on. 3. SYNC LED green If the LED is on, it indicates that the DSL connection is present. This LED flashes during configuration at power up. 4. Online LED green If the LED is on, it indicates that your Username/Password has been authenticated successfully with your ISP. 5. Wireless LAN (WLAN) Status LED green If the LED is on, it indicates that wireless networking is enabled. If the LED is flashing, the link is OK and data is being transmitted or received. If the LED is off, the wireless LAN has been disabled on the Router, or there is a problem (refer to the User Guide). 6. LAN Status LED green If the LED is on, the link between the port and the next piece of network equipment is OK. If the LED is flashing, the link is OK and data is being transmitted or received. If the LED is off, nothing is connected, or the connected device is switched off, or there is a problem with the connection (refer to the User Guide). The port will automatically adjust to the correct speed and duplex. Downloaded from www.Manualslib.com manuals search engine