3Com 3CRWE870075A User Guide - Page 16

BEFORE YOU BEGIN Record the access point MAC address in a safe place before the access point is installed in a hard-to-reach location. The MAC address is printed on the back of the access point housing. The following illustration shows the front and rear views of the access point, including the LEDs and connecting ports. Reset button LEDs Console port Ethernet port Access Point 8500 Access Point 8200/8700 Caution: Do not connect a telephone cable into the Console port; doing so can cause serious damage to the access point. CONNECTING THE STANDARD ANTENNAS The Access Point 8200 is supplied with standard detachable antennas. These should be attached before the access point is installed. If using an alternate antenna, see "Selecting and Connecting a Different Antenna Model" on page 22. 1 Carefully unpack the standard detachable antennas. CAUTION: Do not handle the antenna tips, especially after they are connected to the access point, as this could lead to electrostatic discharge (ESD), which could damage the equipment. 16