3Com 3CRWE870075A User Guide - Page 44

Symptom Solutions While you are configuring the To maintain wireless association, the service area and the access point, the security settings on the client and the access point must Configuration Management match exactly. Therefore, if you are associated with the System stops responding. access point that you are configuring and you change the access point service area or security, make sure to change the client service area to match. If you change the IP address and save the change, you cannot continue to configure the access point using the old IP address. Therefore, if you want to continue configuring this access point after you save this change, you must do the following: 1 Close your browser. 2 Return to the 3Com Device Manager Wireless Network Tree and click Refresh. 3 Select the access point and click Configure to start a new configuration session. The access point cannot be configured using the Web browser. Reset the access point (push the reset button located near the access point LEDs). After you enable the Secure When the Secure Web Server Connection is On, you must Web Server Connection, the specify "https://" in the browser address pane to launch access point resets. When the configuration. you launch the configuration from the 3Com Device Manager, the browser cannot find the configuration web pages. 44