3Ware 9550SXU-8LP User Guide - Page 154
To enable or disable unit write cache through 3DM, In the Con Disk Array screen
UPC - 693494978100
View all 3Ware 9550SXU-8LP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
Chapter 8. Configuring Units To enable or disable unit write cache through 3DM 1 Choose Management > Controller Settings from the menu bar in 3DM. 2 In the Unit Policies section of the Controller Settings Page, check the Write Cache box to enable it for the designated unit. The page refreshes, and a message at the top confirms the change you have made. To enable or disable unit write cache through 3BM 1 At the main 3BM screen, select the unit by highlighting it and pressing Enter. An asterisk appears in the left-most column to indicate that it is selected. 2 Tab to the Maintain Unit button and press Enter. 3 On the pop-up menu, select Configure and press Enter. 4 In the Configure Disk Array screen, Tab to the field Write Cache Settings. Figure 62. Unit Write Cache State in 3BM The current setting-Enabled or Disabled-is shown. (The initial default setting is for write cache to be enabled.) 5 Press Enter to display the choices, use the arrow keys to select the setting you want, and press Enter again to choose it. 144 3ware Serial ATA RAID Controller User Guide