ASRock G41M-S3 User Manual - Page 13

CPU Installation

Get ASRock G41M-S3 PDF manuals and user guides View all ASRock G41M-S3 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

2.3 CPU Installation For the installation of Intel 775-LAND CPU, please follow the steps below. 775-Pin Socket Overview Before you insert the 775-LAND CPU into the socket, please check if the CPU surface is unclean or if there is any bent pin on the socket. Do not force to insert the CPU into the socket if above situation is found. Otherwise, the CPU will be seriously damaged. Step 1. Open the socket: CPU Marked Corner Step 1-1. DLifitsLeevnergUapgtoin9g0° the lever by depressing down and out on the ShoockoetkMatrokedcCleoranerr retention tab. Step 1-2. Rotate the load lever to fully open position at approximately 135 degrees. Step 1-3. Rotate the load plate to fully open position at approximately 100 degrees. Step 2. Insert the 775-LAND CPU: Step 2-1. Hold the CPU by the edges where are marked with black lines. black line black line Step 2-2. Orient the CPU with IHS (Integrated Heat Sink) up. Locate Pin1 and the two orientation key notches. Pin1 orientation key notch orientation key notch Pin1 alignment key alignment key 775-LAND CPU 775-Pin Socket 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
13
13
13
13
13
Lift Lever Up to 90°
CPU Marked Corner
Socket Marked Corner
2.3
CPU Installation
2.3
CPU Installation
2.3
CPU Installation
2.3
CPU Installation
2.3
CPU Installation
For the installation of Intel 775-LAND CPU,
please follow the steps below.
Before you insert the 775-LAND CPU into the socket, please check if
the CPU surface is unclean or if there is any bent pin on the socket.
Do not force to insert the CPU into the socket if above situation is
found. Otherwise, the CPU will be seriously damaged.
Step 1. Open the socket:
Step 1-1.
Disengaging the lever by depressing
down and out on the hook to clear
retention tab.
Step 1-2.
Rotate the load lever to fully open po-
sition at approximately 135 degrees.
Step 1-3.
Rotate the load plate to fully open po-
sition at approximately 100 degrees.
Step 2.
Insert the 775-LAND CPU:
Step 2-1.
Hold the CPU by the edges where are
marked with black lines.
Step 2-2.
Orient the CPU with IHS (Integrated
Heat Sink) up. Locate Pin1 and the two
orientation key notches.
775-Pin Socket Overview
black
line
black
line
775-Pin Socket
Pin1
alignment
key
alignment
key
Pin1
orientation
key
notch
orientation
key
notch
775-LAND CPU