Acer AT310 F1 User Manual - Page 121
RAID configuration utilities, MEGARAID SAS 8204ELP configuration
View all Acer AT310 F1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
103 RAID configuration utilities MEGARAID SAS 8204ELP configuration This section briefly shows how to create a RAID volume with MegaRAID SAS 8204ELP. Entering MegaRAID SAS RAID Configuration Utility To start MegaRAID SAS RAID Configuration Utility for MegaRAID SAS 8204ELP, press + when you see RAID BIOS during POST. Loading factory default settings 1 Select Objects from Management menu. 2 Select Adapter from Objects. The screen shows a list of available adapters. 3 Select an adapter and press . The screen shows the adapter settings. You can change the settings from this menu. 4 Select Factory Default and Yes to load the default settings. 5 Exit the configuration utility and press + + to reboot the server. Creating RAID Volume 1 Select Configuration from the Management Menu. 2 Select New Configuration from the Configuration menu. An array selection window displays the devices connected to the current controller. 3 Press the arrow keys to choose specific physical drives and press the space bar to associate the selected drive with the current array. The indicator for the selected drive changes from READY to ONLINE. 4 After adding the drives to the current array, press to finish creating the current array. 5 Press again to select an array to configure. 6 Press the space bar to select the array and press to configure the logical drive. 7 Select Accept and press to use the default setting for the RAID volume.