Acer H7532BD User Manual - Page 33

English Setting Setting Closed Caption Auto Screen Reset Security Off Off Press Press 23 Closed Caption Auto Screen Reset Security Security Timeout(Min.) User Password Administrator Password Security Off Off Change Change ** Always request password while projector turns on. ** Select Adjust Exit Select Adjust Main Menu Selects a preferred closed captioning mode from CC1, CC2, CC3, CC4, (CC1 displays captions in the primary language in your area). Select "Off" to turn off the captioning feature. This function is only available when a composite video or S-Video input signal is selected and its system format is NTSC. Set your screen aspect ratio to 4:3. This function is not available when the aspect ratio is "16:9" or "Auto" . Default is On, the down/up move of electronic screen will be related with power on/off of Projector. Press the button and choose "Yes" to return the parameters on all menus to the factory default settings. Security This projector provides a useful security function for the administrator to manage usage of the projector . Press to change the "Security" setting. If the security function is enabled, your must enter the "Administrator Password" first before changing the security settings. • Select "On" to enable the security function. The user has to enter a password to operate the projector. Please refer to the "User Password" section for details. • If "Off" is selected, then the user can turn on the projector without password. Timeout(Min.) Once "Security" is activated to "On", the administrator can set timeout function. • Press or to select the timeout interval. • The range is from 10 minute to 990 minutes. • When the time is up, the projector will prompt the user to enter the password again. • The factory default setting of "Timeout(Min.)" is "Off". • Once the security function is enabled, the projector will request user to enter password when switch on the projector . Both "User Password" and "Administrator Password" can be accepted for this dialogue.