Acer Veriton 5800 Veriton 5800/6800/7800 User"s Guide (EN) - Page 60
Opening your Veriton 6800/7800, To remove the side panel
View all Acer Veriton 5800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
52 5 Upgrading your computer Opening your Veriton 6800/7800 Caution! Before you proceed, make sure that you have turned off your computer and all peripherals connected to it. Read the "Preinstallation instructions" on page 49. You need to open your computer before you can install additional components. See the following section for instructions: To remove the side panel 1 Turn off your computer and unplug all cables. 2 Place your computer on a flat, steady surface. 3 Turn the screws counterclockwise with your fingers to release the cover. 4 Hold right panel (from rear view) with both hands. Slide it back about an inch and then gently pull it outward to detach it. Veriton 6800
5 Upgrading your computer
52
Opening your Veriton 6800/7800
Caution!
Before you proceed, make sure that you have turned off
your computer and all peripherals connected to it. Read the
"Preinstallation instructions" on page 49
.
You need to open your computer before you can install additional components.
See the following section for instructions:
To remove the side panel
1
Turn off your computer and unplug all cables.
2
Place your computer on a flat, steady surface.
3
Turn the screws counterclockwise with your fingers to release the cover.
4
Hold right panel (from rear view) with both hands. Slide it back about an
inch and then gently pull it outward to detach it.
Veriton 6800