Alpine HCE-RCAM-WRA Installation Manual
Alpine HCE-RCAM-WRA Manual
 |
View all Alpine HCE-RCAM-WRA manuals
Add to My Manuals
Save this manual to your list of manuals |
Alpine HCE-RCAM-WRA manual content summary:
- Alpine HCE-RCAM-WRA | Installation Manual - Page 1
Jeep Wrangler HCE-RCAM-WRA Stealth-Mount Spare Tire Camera Installation Manual ˜ Model: Wrangler ˜ Model Year: 2007-2018 Jeep Wrangler HCE-RCAM-WRA ˜ 1/16 Jeep Model Year Wrangler (JK) 2007-2018 Wrangler Unlimited (JK) 2007-2018 * The specified vehicles have been tested and have met - Alpine HCE-RCAM-WRA | Installation Manual - Page 2
Wrangler HCE-RCAM-WRA to the instructions, and attach them securely. Failing to do so could lead to an accident or damage equipment. Do not install the product The installation and wiring of this product requires specialized skills and experience. Have the product installed by an Alpine authorized - Alpine HCE-RCAM-WRA | Installation Manual - Page 3
Wrangler HCE-RCAM-WRA ˜ 3/16 Tools Possibly Required (This Will Vary Depending On The Vehicle) Panel Removing Tool Sockets Phillips Screwdriver Wire Cutters Extension Ratchet Crimpers Pliers Torx Screwdriver Accessory List Camera Bracket With HCE-C1100 Pre-assembled + Camera Extension - Alpine HCE-RCAM-WRA | Installation Manual - Page 4
Jeep Wrangler HCE-RCAM-WRA ˜ 4/16 Factory Unit Disassembly Process (2007-2010 Only) Warning: THE BATTERY BEFORE CONTINUING. FAILURE TO DO SO WILL DISABLE MANY FEATURES. 1 Remove top by releasing 2 rear clips on the back of the top panel and then pull panel forward. 2 Release 2 clips on the - Alpine HCE-RCAM-WRA | Installation Manual - Page 5
Jeep Wrangler HCE-RCAM-WRA ˜ 5/16 Factory Unit Disassembly Process (2011-2018 Only) DISCONNECT THE BATTERY BEFORE CONTINUING. FAILURE TO DO SO WILL DISABLE MANY FEATURES. 1 Remove the rubber cover - Alpine HCE-RCAM-WRA | Installation Manual - Page 6
Jeep Wrangler HCE-RCAM-WRA ˜ 6/16 Glove Box Removal 1 Open the glove box. 2 Push inwards both left and right sides to release the glove box out. Removing B-Pillar Panel 1 Remove B-Pillar panel by disengaging 4 clips on both front and rear passenger sides. 2 Using panel removing tool, unclip the - Alpine HCE-RCAM-WRA | Installation Manual - Page 7
Jeep Wrangler HCE-RCAM-WRA ˜ 7/16 Removing Rear Right Side Panel 1 Using T25 Torx, remove the screws on the rear right side panel. 3 Using 10mm socket to remove the panel. 2 Using panel removing tools, pry off seatbelt cover[#1] and remove the roll cage cover[#2]. 1 2 4 Unclip - Alpine HCE-RCAM-WRA | Installation Manual - Page 8
Removal 1 Using 19mm socket, extract the lug nuts. Jeep Wrangler HCE-RCAM-WRA ˜ 8/16 Camera & Light Extension Cable Installation 1 Route the wires: C D B E A 3 Using panel removing tools, unclip and remove wire cover on the rear gate. A. Start from the head unit harness B. Behind the - Alpine HCE-RCAM-WRA | Installation Manual - Page 9
HCE-RCAM-WRA ˜ 9/16 Camera & Light Extension Cable Installation G. Secure to the factory cables. H. Remove OEM grommet. Route the wire out of an OEM grommet hole. Insert the camera harness and cables to prevent water going into the rear gate. Failure to do so may cause moisture to go inside. - Alpine HCE-RCAM-WRA | Installation Manual - Page 10
Camera Connector Harness Connector To SGS-CH01 Main Connector To Rear Camera Input HCE-RCAM-WRA CAM TRIG To optional switch (sold separately) This will activate the camera Used To Power Aftermarket Camera. Refer to the SGS-CH01 manual for wire colors and pins of rear camera harness. Please note - Alpine HCE-RCAM-WRA | Installation Manual - Page 11
) Factory Head Unit HCE-RCAM-WRA To Factory Camera Connector NOTE: The OEM radio will need to be ashed by a Jeep dealer to enable the rear camera feature when using the ALP-HRN-CAMCH ALP-HRN-CAMCH (Sold Seperately) To Rear Camera Input Power & Video Unit Camera Extension Cable To White - Alpine HCE-RCAM-WRA | Installation Manual - Page 12
Jeep Wrangler HCE-RCAM-WRA ˜ 12/16 Wiring Diagram: Alpine Head Unit Using Direct Connection Direct Camera Input Alpine Head Unit (Sold Separately) CAN I/F GPS SXM/DAB USB HDMI IN DISP. OUT HDMI OUT ANTENNA PRE OUT EXT. KEY W.REMOTE POWER HCE-RCAM-WRA Camera Extension Cable Not Used - Alpine HCE-RCAM-WRA | Installation Manual - Page 13
Connector To SGS-CH01 Main Connector To Rear Camera Input HCE-RCAM-WRA CAM TRIG To Factory Harness Not Used Ground And Accessory Can Be Used To Power Aftermarket Camera. See Page 8 of the SGS-CH01 manual for wire colors and pins of rear camera harness. Please note to leave enough space - Alpine HCE-RCAM-WRA | Installation Manual - Page 14
- Other Camera 3 - Front Camera 4 - Rear Camera 5 - Switch 6 - Power Wires Solder these wires to the rear camera connector wires. Refer to the SGS-CH01 manual to see the pin outs. HCE-RCAM-WRA Reverse Out (Orange/Black) Toggle Switch Reverse In (Orange/White) To Factory Harness Alpine Direct - Alpine HCE-RCAM-WRA | Installation Manual - Page 15
to enable the rear camera feature when using the ALP-HRN-CAMCH HCE-RCAM-WRA 12 3 4 56 1 - V. Out 2 - Other Camera 3 - Front Camera 4 - Rear Camera 5 - Switch 6 - Power Wires Toggle Switch Reverse Out (Orange/Black) Reverse In (Orange/White) Accessory (Red) Alpine Direct Front Camera NOTE: It - Alpine HCE-RCAM-WRA | Installation Manual - Page 16
Jeep Wrangler HCE-RCAM-WRA ˜ 16/16 Troubleshooting Symptom 1 Possible Cause Alpine head unit only shows guidelines in reverse. The HCE-RCAM-WRA camera is not outputting a picture. 2 Nothing happens when vehicle is in reverse The SGS-CH01 is not installed properly. ALP-HRN-CAMCH was used and
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
 |
 |
Jeep Wrangler
HCE-RCAM-WRA
±
1/16
Jeep Wrangler
HCE-RCAM-WRA
Stealth-Mount Spare Tire Camera
Installation Manual
±
Model: Wrangler
±
Model Year: 2007-2018
Note
±
Design and specifications are subject to change without notice for improvement.
To Ensure Safe Use, Always Follow These Precautions
±
The installation of this product requires specialized skills and experience. We recommend that you have the
product installed by an Alpine authorized dealer.
±
Before you use this product, be sure to carefully read this installation manual and the separate user's manual
so that you can use the product correctly. Alpine Electronics bears no responsibility for problems that arise as
a result of failure to follow the instructions in the manuals.
±
This manual includes a number of symbols that are intended to help you use the product safely, to prevent
harm to you and others, and to protect against damage to property. These symbols and their meanings are
listed below. Make sure you fully understand these symbols before you begin reading the main text.
Explanations of Injury and Damage That May Result from Incorrect Use
Warning
Ignoring the content marked by this indication and using the product incorrectly is
expected to lead to death or serious injury.
Caution
Ignoring the content marked by this indication and using the product incorrectly is only
expected to lead to injury or property damage.
Jeep
Model
Year
Wrangler (JK)
2007-2018
Wrangler Unlimited (JK)
2007-2018
* The specified vehicles have been tested and have met compatibility specs at the time of testing. Compatibility is
not guaranteed if the manufacturer has made production changes to the listed vehicles above.
Warning: Before you begin wiring, remove the ground wire from the negative
terminal of the battery. Failing to do so can lead to electric shock, injury or damage
to equipment.
Introduction
±
Congratulations on purchasing the HCE-RCAM-WRA. This installation manual is designed to take you through
the installation of HCE-RCAM-WRA. Please familiarize yourself with the owners manual and if you still have
additional questions please call 1-800-TECH-101.