Alpine HCE-RCAM-WRA Installation Manual - Page 7
Removing Rear Right Side Panel
View all Alpine HCE-RCAM-WRA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Jeep Wrangler HCE-RCAM-WRA 7/16 Removing Rear Right Side Panel 1 Using T25 Torx, remove the screws on the rear right side panel. 3 Using 10mm socket to remove the panel. 2 Using panel removing tools, pry off seatbelt cover[#1] and remove the roll cage cover[#2]. 1 2 4 Unclip the cigarette lighter socket from the harness. 5 Remove the Rear Right Side Panel.
Jeep Wrangler
HCE-RCAM-WRA
±
7/16
Removing Rear Right Side Panel
1
Using T25 Torx, remove the screws on the rear right
side panel.
2
Using panel removing tools, pry off seatbelt
cover[#1] and remove the roll cage cover[#2].
2
1
3
Using 10mm socket to remove the panel.
4
Unclip the cigarette lighter socket from the harness.
5
Remove the Rear Right Side Panel.