Alpine HCE-RCAM-WRA Installation Manual - Page 14

Jeep Wrangler HCE-RCAM-WRA ˜ 14/16 Wiring Diagram: OEM Head Unit With SGS-CH01 & KCX-C2600B (Sold Separately) Factory Head Unit SGS-CH01 (Sold Seperately) IN OUT To Factory To Factory Main Camera Connector Harness Connector To SGS-CH01 Main Connector KCX-C2600B (Sold Separately) To Rear Camera Input 12 3 4 56 1 - V. Out 2 - Other Camera 3 - Front Camera 4 - Rear Camera 5 - Switch 6 - Power Wires Solder these wires to the rear camera connector wires. Refer to the SGS-CH01 manual to see the pin outs. HCE-RCAM-WRA Reverse Out (Orange/Black) Toggle Switch Reverse In (Orange/White) To Factory Harness Alpine Direct Front Camera NOTE: It is highly recommended to use an Alpine direct connect camera for the front camera. Any other camera can not be guaranteed to work. To Red Pin 4 To Chassis Ground Accessory (Red) Battery (Yellow) Ground (Black) Accessory (Red) Ground (Black) NOTE: The HCE-C1100 can NOT be plugged in directly. It must be used with the Power & Video unit and plugged in with the RCA. To Orange/White Pin 1 To Red Pin 4 To Yellow Pin 1 of SGS-CH01 Main Connector To Chassis Ground Power & Video Unit Orange/Black CAM TRIG Camera Extension Cable