Alpine HCE-RCAM-WRA Installation Manual - Page 10
Wiring Diagram: OEM Head Unit With SGS-CH01 Sold Seperately - manual
View all Alpine HCE-RCAM-WRA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Jeep Wrangler HCE-RCAM-WRA 10/16 Wiring Diagram: OEM Head Unit With SGS-CH01 (Sold Seperately) Factory Head Unit SGS-CH01 (Sold Seperately) IN OUT To Factory To Factory Main Camera Connector Harness Connector To SGS-CH01 Main Connector To Rear Camera Input HCE-RCAM-WRA CAM TRIG To optional switch (sold separately) This will activate the camera while the vehicle is not in reverse with a +12V input. The illustration is a standard rocker style switch that should be able to be purchased at most electronic supply stores. Guidelines are not displayed when manually triggered. To Factory Harness Camera Extension Cable Power & Video Unit +12V Accessory (Red) Ground (Black) Ground And Accessory Can Be Used To Power Aftermarket Camera. Refer to the SGS-CH01 manual for wire colors and pins of rear camera harness. Please note to leave enough space in case the connector would need to be soldered back on. To Red Pin 4 To Chassis Ground