Alpine HCE-RCAM-WRA Installation Manual - Page 4
Factory Unit Disassembly Process 2007-2010 Only
View all Alpine HCE-RCAM-WRA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Jeep Wrangler HCE-RCAM-WRA 4/16 Factory Unit Disassembly Process (2007-2010 Only) Warning: Before you begin wiring, remove the ground wire from the negative terminal of the battery. Failing to do so can lead to electric shock, injury or damage to equipment. DISCONNECT THE BATTERY BEFORE CONTINUING. FAILURE TO DO SO WILL DISABLE MANY FEATURES. 1 Remove top by releasing 2 rear clips on the back of the top panel and then pull panel forward. 2 Release 2 clips on the top of the bottom panel. This will expose two 7mm screws. Remove those. 3 Release 2 clips on the top of the bottom panel. This will expose two 7mm screws. Remove using a 7mm socket with ratchet & extension. 4 Use panel removal tool to remove dash panel by releasing 6 clips (3 per side) 5 Extract (4) 7 mm screws and remove the factory radio.