Alpine IDAX001 Owners Manual - Page 10

Radio SOURCE/ Center Jog Dial BAND VIEW TUNE/A.ME ENT /SEARCH PRESET This unit cannot receive HD Radio™ signals (digital terrestrial radio). In order to activate the digital radio functions described below, an optional HD Radio Tuner module must be connected through the Ai-NET bus. HD Radio™ Technology Manufactured Under License From iBiquity Digital Corporation. iBiquity Digital and the HD Radio and HD Symbols are trademarks of iBiquity Digital Corporation. U.S. and Foreign Patents. How to View the Display 1 4 2 5 3 6 1 Mode display 2 Preset number 3 Volume 4 Tuning mode 5 Frequency 6 Calendar/Time Listening to Radio HD Radio™ can be received if the HD Radio TUNER MODULE (TUA-T500HD) is connected. While receiving HD Radio, the unit can automatically switch between the analog and digital signal. 1 Press SOURCE/ to select TUNER mode. 2 Press BAND repeatedly until the desired radio band is displayed. FM-1 FM-2 AM FM-1 3 Press TUNE/A.ME to select the tuning mode. DX (Distance mode) Local (Local mode) Manual (Manual mode) DX (Distance mode) • The initial mode is Distance mode. Distance mode: Both strong and weak stations will be automatically tuned in (Automatic Seek Tuning). Local mode: Only strong stations will be automatically tuned in (Automatic Seek Tuning). Manual mode: The frequency is manually tuned in steps (Manual tuning). 4 Press or to tune in the desired station. Holding down or will change the frequency continuously. • The "Digital" appears on the display when a digital radio station which contains both audio and text information, is received. • If Digital Seek is set to ON, the SEEK UP/DOWN functions only stop on digital station frequencies while receiving HD radio. Refer to "Digital Seek On/Off Setting" (page 22). Presetting Stations Manually 1 Select the radio band and tune in a desired radio station you wish to store in the preset memory. 2 Press PRESET. The Preset screen is displayed. 3 Turn the Center Jog Dial to select the preset number. 4 Press and hold ENT for at least 2 seconds. The selected station is stored. The display shows the band, preset number and station frequency memorized. • A total of 18 stations can be stored in the preset memory (6 stations for each band; FM1, FM2 and AM). • If you store a station in a preset memory which already has a station, the current station will be cleared and replaced with the new station. 8-EN