Alpine IDAX001 Owners Manual - Page 11

Presetting Stations Automatically 1 Press BAND repeatedly until the desired radio band is displayed. 2 Press and hold TUNE/A.ME for at least 2 seconds. "Auto Memory" is displayed while the automatic memory is in progress. The tuner will automatically seek and store 6 strong stations in the selected band. They will be stored 1 to 6 in order of signal strength. When the automatic memory has been completed, the tuner goes to the station stored in preset location No.1. • If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began. Tuning to Preset Stations 1 Press BAND repeatedly until the desired band is displayed. 2 Press PRESET. The Preset screen is displayed. 3 Turn the Center Jog Dial to select a radio station. 4 Press ENT. The display shows the band, preset number and frequency of the station selected. 3 Turn the Center Jog Dial to select a program, and press ENT. The selected program is received. Program Service example: Multicast Radio Station Program No. 88.8MHz No.1 88.8MHz No.2 88.8MHz No.3 · · · 88.8MHz No.8 Program Service MPS: Main Program Service SPS: Sub-program Service SPS: Sub-program Service SPS: Sub-program Service Changing the Display (HD Radio mode only) Press VIEW. Every time VIEW is pressed changes the display. Song title Album title Artist title Frequency Station Call Letter* Calendar/ Time Song title Album title Artist title Frequency * You can set a long or short HD Radio station name. Refer to "HD Radio Station Call Setting" (page 22). Receiving a Multicast Station (HD Radio mode only) Multicasting which is the Ability to broadcast multiple program streams over a single FM frequency thereby increasing the amount and diversity of content choices. A maximum of eight multicast station channels can be selected on this unit. 1 When multicast station is received, the program number is displayed. Program No. 2 Press /SEARCH to display the Program Type screen. 9-EN