Alpine iDA-X305S Om Ida-x305s English - Page 11
Tuning to Preset Stations - no audio
UPC - 793276711687
View all Alpine iDA-X305S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Listening to Radio HD Radio™ broadcasting can be received if the HD Radio TUNER MODULE is connected. While receiving HD Radio signal, the unit can automatically switch between the analog and digital signal. 1 Press SOURCE to select TUNER mode. 2 Press BAND repeatedly until the desired radio band is displayed. FM-1 FM-2 AM FM-1 3 Press TUNE/A.ME to select the tuning mode. DX (Distance mode) Local (Local mode) Manual (Manual mode) DX (Distance mode) • The initial mode is Distance mode. Distance mode: Both strong and weak stations will be automatically tuned in (Automatic Seek Tuning). Local mode: Only strong stations will be automatically tuned in (Automatic Seek Tuning). Manual mode: The frequency is manually tuned in steps (Manual tuning). 4 Press or to tune in the desired station. Holding down or will change the frequency continuously. • "Digital" appears in the display whenever an HD Radio station (containing both audio and text information) is received. • If Digital Seek is set to ON, the SEEK UP/DOWN functions stops on HD Radio broadcasts only. Refer to "Digital Seek On/Off Setting (Digital Seek)" (page 26). Presetting Stations Manually 1 Select the radio band and tune in a desired radio station you wish to store in the preset memory. 2 Press (PRESET). The Preset screen is displayed. 3 Rotate the Double Action encoder to select the preset number. 4 Press and hold /ENTER for at least 2 seconds. The selected station is stored. The display shows the band, preset number and station frequency memorized. • A total of 18 stations can be stored in the preset memory (6 stations for each band; FM1, FM2 and AM). • If you store a station in a preset memory which already has a station, the current station will be cleared and replaced with the new station. • Press in the outer ring and rotate the Double Action encoder to the left or right on the Preset screen, you can switch the Preset screen of another band. FM-1 FM-2 AM FM-1 You can also change the desired radio band by pressing BAND. Presetting Stations Automatically 1 Press BAND repeatedly until the desired radio band is displayed. 2 Press and hold TUNE/A.ME for at least 2 seconds. "Auto Memory" is displayed while the automatic memory is in progress. The tuner will automatically seek and store 6 strong stations in the selected band. They will be stored 1 to 6 in order of signal strength. When the automatic memory has been completed, the tuner goes to the station stored in preset location No.1. • If no stations are stored, the tuner will return to the original station you were listening to before the auto memory procedure began. Tuning to Preset Stations 1 Press BAND repeatedly until the desired band is displayed. 2 Press (PRESET). The Preset screen is displayed. 3 Rotate the Double Action encoder to select a radio station. 4 Press /ENTER. The display shows the band, preset number and frequency of the station selected. • Press in the outer ring and rotate the Double Action encoder to the left or right on the Preset screen, you can switch the Preset screen of another band. FM-1 FM-2 AM FM-1 You can also change the desired radio band by pressing BAND. Receiving a Multicast Station (HD Radio mode only) Multicasting is the ability to broadcast multiple program streams over a single FM frequency. This increases the amount and diversity of content choices. A maximum of eight multicast station channels can be selected on this unit. 1 When multicast station is received, the program number is displayed. Program No. 9-EN