Alpine iDA-X305S Om Ida-x305s English - Page 44

Specifications FM TUNER SECTION Tuning Range Mono Usable Sensitivity 50 dB Quieting Sensitivity Alternate Channel Selectivity Signal-to-Noise Ratio Stereo Separation Capture Ratio 87.7-107.9 MHz 9.3 dBf (0.8 µV/75 ohms) 13.5 dBf (1.3 µV/75 ohms) 80 dB 65 dB 35 dB 2.0 dB AM TUNER SECTION Tuning Range Sensitivity (IEC Standard) 530-1,710 kHz 22.5 µV/27 dB USB SECTION USB requirements USB 1.1/2.0 Max. Power Consumption 500mA File System FAT12/16/32 MP3 Decoding MPEG-1/2 AUDIO Layer-3 WMA Decoding Windows Media™ Audio (WMDRM10 is supported) AAC Decoding AAC-LC format ".m4a" file Number of Channels 2-Channel (Stereo) Frequency Response* 5-20,000 Hz (±1 dB) Total Harmonic Distortion 0.008% (at 1 kHz) Dynamic Range 95 dB (at 1 kHz) Signal-to-Noise Ratio 105 dB Channel Separation 85 dB (at 1 kHz) * Frequency response may differ depending on the encoder software/bit rate. GENERAL Power Requirement 14.4 V DC (11-16 V allowable) Power Output 18 W RMS × 4* *Primary amplifier ratings per CEA-2006 Standard • Power output: measured at 4 Ohms and 1% THD+N • S/N: 80 dBA (reference: 1 W into 4 Ohms) Maximum Pre-Output Voltage 2 V/10 k ohms Weight 1.0 kg (2 lbs. 3 oz) CHASSIS SIZE Width Height Depth 178 mm (7") 50 mm (2") 156 mm (6-1/8") NOSEPIECE SIZE Width Height Depth 170 mm (6-3/4") 46 mm (1-13/16") 28 mm (1-1/8") DETACHABLE FRONT PANEL SIZE Width Height Depth 108 mm (4-1/4") 46 mm (1-13/16") 36 mm (1-7/16") • Due to continuous product improvement, specifications and design are subject to change without notice. • Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. • iPod and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries. iPhone is a trademark of Apple Inc., registered in the U.S. and other countries. • "Made for iPod" means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards. • "Works with iPhone" means that an electronic accessory has been designed to connect specifically to iPhone and has been certified by the developer to meet Apple performance standards. • Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. • Audyssey MultEQ XT is a registered trademark of Audyssey Laborarories Inc. • The BLUETOOTH® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Alpine Electronics, Inc. is under license. • Pandora and the Pandora logo are registered trademarks of Pandora Media, Inc. All rights reserved. Due to music licensing restrictions, the Pandora radio service is only available in the United States. • XM and its corresponding logos are trademarks of XM Satellite Radio Inc. • SIRIUS and its corresponding logos are trademarks of SIRIUS Satellite Radio Inc. • HD Radio™ and the HD and HD Radio Ready logos are proprietary trademarks of iBiquity Digital Corp. • "MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson." • "Supply of this product only conveys a license for private, noncommercial use and does not convey a license nor imply any right to use this product in any commercial (i.e. revenuegeneration) real time broadcasting (terrestrial, satellite, cable and/or any other media), broadcasting/streaming via internet, intranets and/or other networks or in other electronic content distribution systems, such as pay-audio or audio-on-demand applications. An independent license for such use is required. For details, please visit http://www.mp3licensing.com" • "Uni-Type™" is a style of Universal design font developed by a joint reserch between LIM Corporation Ltd., and Chiba University Faculty of Engineering. • "Uni-Type™" is the trademark registered by LIM Corporation Ltd. 42-EN