Apple Ipod Shuffle User Guide - Page 11

To charge the battery using the Apple USB Power Adapter: 1 Connect the included iPod shuffle USB cable to the power adapter, and plug the other end into iPod shuffle. 2 Plug the power adapter into a working power outlet. Apple USB Power Adapter (your adapter may look different) iPod shuffle USB cable WARNING: Make sure the power adapter is fully assembled before plugging it into a power outlet. Read all safety instructions about using the Apple USB Power Adapter in Chapter 7, "Safety and Handling," on page 34 before use. Rechargeable batteries have a limited number of charge cycles. Battery life and number of charge cycles vary by use and settings. For information, go to www.apple.com/batteries. Checking the Battery Status You can check the battery status of iPod shuffle when it's connected to your computer or disconnected. The status light tells you approximately how much charge is in the battery. If iPod shuffle is on and not connected to a computer, you can use VoiceOver to hear the battery status by pressing the VoiceOver button twice. Status light when disconnected Solid green Solid orange Solid red Good charge Low charge Very low charge VoiceOver message "Battery full" or "Battery 75%" or "Battery 50%" "Battery 25%" "Battery low" Status light when connected to computer Solid green Solid orange Blinking orange Fully charged Charging Do not disconnect (iTunes is syncing, or iPod shuffle is enabled for disk use); may be still charging or may be fully charged Chapter 2 iPod shuffle Basics 11