Asko D5233 User manual Use & Care Guide Asko D5233 EN - Page 24

Troubleshooting

Page 24 highlights

Troubleshooting Problems Possible causes Action The dishes are not clean • The spray arms are not rotating • Lift off the arms and clean • Old dishwasher detergent. Note! Detergent is perishable • Avoid large packs • Incorrect dosage of detergent • Dispense according to the level of water hardness • Wrong wash program selected • Heavier programs are longer, and use higher temperatures for dirtier loads. Use a heavier program better suited for the load • Incorrect loading of the dish- • Do not cover china with large washer bowls or the like • Try not to place too much tall glassware in the corners of the baskets • Glasses and cups have tipped • Load the china securely over during the wash Stains or a film on the china • Incorrectly set rinse aid dispenser • See the chapter on rinse aid • Phosphate-free detergent in • Change detergent combination with hard water • Too high a temperature and/or too much detergent can cause etching on(crystal) glass. Unfortunately this cannot be remedied, only prevented! • Wash (crystal) glass at a low temperature and use dishwasher detergent sparingly. Contact the dishwasher detergent manufacturer The china has a whitishblue sticky film • Too high dosage of rinse aid • Reduce dosage. See the chapter on rinse aid. If the water is very soft, you could try diluting the rinse aid with water (1 part rinse aid, 1 part water) Customer Care Center 24 1-800-898-1879 www.askousa.com

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

24
Customer Care Center
1-800-898-1879
www.askousa.com
Troubleshooting
Problems
Possible causes
Action
• The
spray arms are not
rotating
• Old dishwasher detergent.
Note! Detergent is perishable
• Incorrect dosage of detergent
• Wrong wash program se
-
lected
• Incorrect loading of the dish
-
washer
• Glasses and cups have tipped
over during the wash
• Incorrectly set
rinse aid
dispenser
• Phosphate-free detergent in
combination with hard water
• Too high a
temperature and/or
too much detergent can cause
etching on(crystal) glass.
Unfortunately this cannot be
remedied, only prevented!
• Too high dosage of rinse aid
The dishes are not clean
Stains or a film on the
china
The china has a whitish-
blue sticky film
• Lift off the arms and clean
• Avoid large packs
• Dispense according to the
level of water hardness
• Heavier programs are longer,
and use higher temperatures
for dirtier loads. Use a heavi-
er program better suited for
the load
• Do not cover china with large
bowls or the like
• Try not to place too much tall
glassware in the corners of
the baskets
• Load the china securely
• See the chapter on rinse aid
• Change detergent
• Wash (crystal) glass at a
low temperature and use
dishwasher detergent spar-
ingly. Contact the dishwasher
detergent manufacturer
• Reduce dosage. See the
chapter on rinse aid. If the
water is very soft, you could
try diluting the rinse aid with
water (1 part rinse aid, 1 part
water)