Asko DC7583 User manual 427000608 ASKO DC7573 EN - Page 12

Vent connection Moist air can be evacuated in two ways: • Exhaust air from the drying cabinet is channeled to an exhaust duct or an outlet in the wall using a UL-approved vent hose. Recommended! • Ventilation out into the room where the drying cabinet stands. Ventilation out into the room where the drying cabinet stands • Preferably open a door or a window in the room for the best ventilation. • When the drying cabinet is built-in, the supplied vent hose (some markets only) is replaced with a permanent vent pipe with a diameter of 3,9" (100 mm). • The distance between the top edge of the vent pipe and the ceiling must not be less than 11,8" (300 mm). • The vent pipe must reach outside the recess. • Ensure a good air supply to the drying cabinet's air intake. • The vent holes in the drying cabinet must not be blocked. 1. Moist air out 2. Air intake 2 1 Minimum 300 mm to the ceiling Ventilation out into the room where the drying cabinet stands. Drying cabinet, freestanding Minimum 300 mm to the ceiling 1 2 Ventilation out into the room where the drying cabinet stands. Drying cabinet, built-in in recess. 10 Customer Care Center 1-800-898-1879 www.askousa.com