Asko DC7583 User manual 427000608 ASKO DC7573 EN - Page 17

Installation Positioning 1. Place the drying cabinet where it is to stand. 2. Open the door and adjust the level of the drying cabinet so that it stands firmly on all four feet. WARNING! The drying cabinet must be screwed to the wall. Since the cabinet is top-heavy, there is a risk of it tipping forward. Level adjustment 1. Use a spirit level to check that the cabinet stands level. 2. Use the supplied Allen key and adjust all four feet through the holes in the drying cabinet's bottom plate (use pliers if necessary). 3. Insert the four cover plugs (found in the document bag) in the holes. 3 4. Slide the cabinet back into place and screw it in position with the supplied screws. 5. Fit the cover plugs. 1 2 6 5 4 3 6 2 12 1. Spirit level 2. Allen key 3. Cover plug, x 4 Securing 1. Place the drying cabinet where it is to stand, open the door, and pull out the top hanger section. 2. Mark the drill holes on the wall through the two pre-drilled holes in the rear panel of the drying cabinet. 3. Pull the cabinet forward and drill the holes in the wall for the securing screws. Use the enclosed plastic plugs or other anchors if necessary. 1. Pre-drilled holes 2. Securing screws 3. Plastic plug 4. Wall behind drying cabinet 5. Rear panel of drying cabinet 6. Cover plug Customer Care Center 15 1-800-898-1879 www.askousa.com