Asko T411HSW Use and Care Guide English - Page 24

STEP 5: CHOOSING THE PROGRAM SETTINGS Using the program settings, the drying programs can be further adjusted to your preferences. Some program settings may not be available for your selected program. Selected program settings will remain stored after the end of the drying cycle and may be changed subsequently (except for delayed start which is not stored after the drying is complete). 1. Dryness level (extra dry) 2. Anti-crease 3. Load 1 2 34 56 4. Steam (steam drying) 5. Time (timed drying) 6. Delay Start Choose the program settings before pressing the START button. When the drying program is in progress, program settings cannot be changed. Press and hold the button under a program setting to display the information (INFO) about it. Following are the program settings that may be selected using the buttons 1 to 6: 1. Dryness level (extra dry) By pressing the button 1, you can choose between extra dryness levels Each time the button is pressed, the final level of laundry dryness and drying time will change. 2. Anti-crease This function pertains to what happens after the drying cycle. By pressing the button 2 you can choose the duration of the anti-crease program from 0 hours , in 1-hour increments. 3. Load By pressing the button 3, you can choose between loads of the dryer. Full load Small load Partial load Selection of actual load affects the initially displayed anticipated drying time. to 4 hours 4. Steam (steam drying) By pressing the button 4, you can switch the steam drying on or off. Steam finish gives the laundry a steam treatment, like straightening the creases and refreshing the laundry with steam in the end of program cycle (only for programs in which steam treatment is possible). 24 Customer Care Center, 1-800-898-1879, www.askona.com