Asko T411HSW Use and Care Guide English - Page 37
Emptying The Steam Generator Tank
View all Asko T411HSW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
EMPTYING THE STEAM GENERATOR TANK Before transporting a dryer that has been previously used, the steam generator tank must also be emptied. Otherwise, water from the tank may spill into the dryer interior. 1 Move the dryer approximately 40 cm (15.75") away from the wall and tilt it backwards. 2 The steam generator tank discharge (emptying) plug is located on the bottom (front left-hand side). 3 Place an empty vessel under the plug (approximately 2 litres (0.5 gal)) and pull out the plug. 4 When the water is discharged, reinstall the plug (if the plug is not reinstall, water will spill from the dryer during the next washing cycle). Customer Care Center, 1-800-898-1879, www.askona.com 37
37
Customer Care Center, 1-800-898-1879, www.askona.com
EMPTYING THE STEAM GENERATOR TANK
Before transporting a dryer that has been previously used, the steam generator tank must also be
emptied. Otherwise, water from the tank may spill into the dryer interior.
1
Move the dryer approximately 40 cm (15.75") away
from the wall and tilt it backwards.
2
The steam generator tank discharge (emptying)
plug is located on the bottom (front left-hand side).
3
Place an empty vessel under the plug
(approximately 2 litres (0.5 gal)) and pull
out the plug.
4
When the water is discharged, reinstall the plug
(if the plug is not reinstall, water will spill from the
dryer during the next washing cycle).