Asko T411HSW Use and Care Guide English - Page 35
ns of the heat exchanger.
View all Asko T411HSW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
5 Use a soft dry cloth to also clean the heat pump filter housing and net. Lower part of the hosing contains a strainer which should be cleaned thoroughly. Clean the heat pump filter housing and net after every 10 drying cycles or if necessary. With automatic heat pump net filter cleaning (only available in some models), a few drops of water may drip on the floor after the filter is removed; therefore, lay a cloth on the floor. 6 The dust and dirt in the metal fins of the heat exchanger can be cleaned with a vacuum cleaner and a soft brush attachment. Without pressing, gently move the brush attachment only in the direction of the metal fins from top to bottom. Too much pressure can damage or bend the metal fins of the heat exchanger. We recommend you clean the heat exchanger at least every twelve months. 7 Reassemble the foam filter and the filter housing. 8 Reinstall the inside cover and rotate the levers clockwise to the vertical position. Close the outer cover. The heat pump filter has to be correctly placed into its slot. Otherwise, the heat exchanger installed inside the dryer may be clogged. Customer Care Center, 1-800-898-1879, www.askona.com 35