Asko T411HSW Use and Care Guide English - Page 7

BEFORE USING THE APPLIANCE FOR THE FIRST TIME PACKAGING Remove all packaging. Please sort the materials in compliance with local recommendations (see chapter "DISPOSAL"). CLEANING Disconnect the dryer from the power mains and open the door towards you. Clean the dryer drum with a damp cloth and a mild detergent. No program can be started while the door is open. CHOOSING THE LANGUAGE When the dryer is connected (see chapter "INSTALLATION AND CONNECTION") and switched on for the first time, choose the preferred language: 1. Use the program selector knob or button 2 to scroll the list of languages. 2. Confirm your selection by pressing the OK button. 3. Press the "Finalize" button to confirm your selection. For further drying process, see chapter "DRYING PROCESS". STEAM PROGRAMS If you select one of the steam programs as the first program to be run with your dryer, first add distilled water to the steam generator tank (min.=0.3 l (0.08 gal); max.=1.5 l (0.4 gal)); the dryer needs the distilled water to generate steam. If the steam generator tank is empty, none of the steam programs will be available. "LOW" will be indicated on the display (empty steam generator tank). As you use your dryer, the system will be filled automatically with condensed water extracted during the drying process. Only use distilled water. Use of regular tap water or any additives is forbidden. Limescale may damage the heater. Such damage is not covered by the warranty. Only add distilled water when the appliance is switched on and one of the steam programs is selected (but before you start the program). Otherwise, the level sensor will not operate and water may overflow to the dryer interior. Customer Care Center, 1-800-898-1879, www.askona.com 7