Asus P8P67 DELUXE User Manual

Asus P8P67 DELUXE Manual

Get Asus P8P67 DELUXE PDF manuals and user guides View all Asus P8P67 DELUXE manuals
Add to My Manuals
Save this manual to your list of manuals

Asus P8P67 DELUXE manual content summary:

  • Asus P8P67 DELUXE | User Manual - Page 1
    Motherboard P8P67 Deluxe
  • Asus P8P67 DELUXE | User Manual - Page 2
    A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE than December 1, 2011, either (1) for free by downloading it from http://support.asus.com/download; or (2) for the cost of reproduction and shipment,
  • Asus P8P67 DELUXE | User Manual - Page 3
    ...vii About this guide...viii P8P67 Deluxe specifications summary x Chapter 1: Product introduction 1.1 Welcome!...1-1 1.2 Package contents 1-1 1.3 Special features 1-2 1.3.1 Product highlights 1-2 1.3.2 Dual Intelligent Processors 2 with DIGI+ VRM 1-3 1.3.3 ASUS Exclusive Features
  • Asus P8P67 DELUXE | User Manual - Page 4
    3.8.2 ASUS O.C. Profile 3-28 3.8.3 ASUS Drive Xpert 3-29 3.9 Exit menu 3-30 3.10 Updating BIOS 3-31 3.10.1 ASUS Update utility 3-31 3.10.2 ASUS EZ Flash 2 utility 3-34 3.10.3 ASUS CrashFree BIOS 3 utility 3-35 3.10.4 ASUS BIOS Updater 3-36 Chapter 4: Software support 4.1 Installing
  • Asus P8P67 DELUXE | User Manual - Page 5
    Audio configurations 4-13 4.4 RAID configurations 4-14 4.4.1 RAID definitions 4-14 4.4.2 Installing Serial ATA hard disks 4-15 4.4.3 Setting the RAID item in BIOS 4-15 4.4.4 Intel® Rapid Storage Technology Option ROM utility 4-15 4.4.5 Marvell RAID utility 4-19 4.5 Creating a RAID driver
  • Asus P8P67 DELUXE | User Manual - Page 6
    installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with manufacturer's instructions from digital apparatus set out in the Radio ASUS REACH website at http://csr.asus.com/english/REACH.htm. DO NOT throw the motherboard
  • Asus P8P67 DELUXE | User Manual - Page 7
    Ensure that your power supply is set to the correct voltage in your service technician or your retailer. Operation safety • Before installing the motherboard and adding devices on it, carefully read all the manuals problems with the product, contact a qualified service technician or your retailer. vii
  • Asus P8P67 DELUXE | User Manual - Page 8
    when installing and configuring the motherboard. How this guide is organized This guide contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports. • Chapter 2: Hardware information This chapter lists the
  • Asus P8P67 DELUXE | User Manual - Page 9
    of the following symbols used throughout this manual. DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task. CAUTION: Information to prevent damage to the components when trying to complete a task. IMPORTANT: Instructions that you MUST follow to complete
  • Asus P8P67 DELUXE | User Manual - Page 10
    P8P67 Deluxe specifications summary CPU Chipset Memory Expansion slots Multi-GPU support Storage LAN Bluetooth LGA1155 socket for Intel® 2nd Generation Core™ i7 / �C�o�r�e i5��/ Core™ i3 �P�r�o�c�e�s�s�o�r�s Supports 32nm CPU Supports Intel® Turbo Boost Technology 2.0 * The Intel® Turbo Boost
  • Asus P8P67 DELUXE | User Manual - Page 11
    3.0 ports at midboard for front panel support - 2 x USB 3.0 ports at back panel (blue) Intel® P67 Express Chipset - 12 x USB 2.0 ports (4 ports at midboard; 8 ports at back panel) ASUS Dual Intelligent Processors 2 with DIGI+ VRM: ASUS DIGI+ VRM - Industry leading Digital 16+2 Phase Power Design
  • Asus P8P67 DELUXE | User Manual - Page 12
    1394a port 2 x LAN (RJ-45) ports (1 x Intel® LAN) 2 x USB 3.0/2.0 ports (blue) 8 x USB 2.0/1.1 ports 1 x Clear CMOS switch 8-channel Audio I/O ports Internal I/O connectors 1 x USB 3.0/2.0 connector supports additional 2 USB ports (19-pin) 2 x USB 2.0/1.1 connectors support additional 4 USB ports
  • Asus P8P67 DELUXE | User Manual - Page 13
    of ASUS quality motherboards! Before you start installing the motherboard, and hardware devices on it, check the items in your package with the list below. 1.2 Package contents Check your motherboard package for the following items. User Manual ASUS P8P67 Deluxe motherboard User guide Support
  • Asus P8P67 DELUXE | User Manual - Page 14
    up to 10 times faster than USB 2.0. The P8P67 Deluxe affords greater convenience to high speed connectivity. Extra SATA 6.0 Gb/s Support The Intel® P67 Express Chipset natively supports the next-generation Serial ATA (SATA) interface, delivering up to 6.0 Gb/s data transfer. ASUS provides extra
  • Asus P8P67 DELUXE | User Manual - Page 15
    with 7 special functions that offer significant breakthrough in Bluetooth evolution, including Folder Sync, BT Transfer, BT Turbo Remote, BT-to-Net, Music Player, Shot and Send, and Personal Manager. All are accessible through the exclusive, user-friendly ASUS interface. ASUS P8P67 Deluxe 1-3
  • Asus P8P67 DELUXE | User Manual - Page 16
    settings. Supports Hard Drives over 2.2TB AUS EFI BIOS natively supports hard drives larger than 2.2TB in 64-bit, with full storage space utilization, helping deliver far more exciting computing than traditional BIOS versions! ASUS Q-Design ASUS Q-Design enhances your DIY experience. All of Q-LED
  • Asus P8P67 DELUXE | User Manual - Page 17
    front panel cables to the motherboard. This unique module eliminates the trouble of connecting the system panel cables one at a time and avoiding wrong cable connections. ASUS EZ-Flash 2 ASUS EZ Flash 2 is a user-friendly utility that allows you to update the BIOS without using a bootable floppy
  • Asus P8P67 DELUXE | User Manual - Page 18
    Chapter 1 1-6 Chapter 1: Product Introduction
  • Asus P8P67 DELUXE | User Manual - Page 19
    the bag that came with the component. • Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components. ASUS P8P67 Deluxe 2-1
  • Asus P8P67 DELUXE | User Manual - Page 20
    2.2 Motherboard overview 2.2.1 Motherboard layout Chapter 2 Refer to 2.2.7 Internal connectors and 2.3.10 Rear panel connection for more information about rear panel connectors and internal connectors. 2-2 Chapter 2: Hardware information
  • Asus P8P67 DELUXE | User Manual - Page 21
    ATA 6.0 Gb/s connectors (7-pin SATA6G_1/2 [gray]) 10. Intel® P67 Serial ATA 3.0 Gb/s connectors (7-pin SATA3G_3-6 [blue]) 11. System panel connector (20-8 pin PANEL) 12. Q-Code LED (LED1, LED2) 13. USB 2.0 connectors (10-1 pin USB1112, USB1314) 14. Reset switch 15. Power-on switch 16
  • Asus P8P67 DELUXE | User Manual - Page 22
    CPU) The motherboard comes with a surface mount LGA1155 socket designed for the Intel® 2nd Generation Core™ i7 / Core™ i5 / Core™ i3 Processors. Chapter 2 Ensure that all power cables are unplugged before installing the CPU. • The LGA1156 CPU is incompatible with the LGA1155 socket. DO NOT install
  • Asus P8P67 DELUXE | User Manual - Page 23
    memory The motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory Modules (DIMM) slots. A DDR3 module is notched differently from a DDR or DDR2 module. DO NOT install a DDR or DDR2 memory module to the DDR3 slot. Recommended memory configurations Chapter 2 ASUS P8P67 Deluxe 2-5
  • Asus P8P67 DELUXE | User Manual - Page 24
    can be supported with DIMMs of 8GB (or above). ASUS will update QVL once the DIMMs are available on the market. • According to Intel CPU spec, DIMM voltage below 1.65V is recommended to protect the CPU. • Always install DIMMs with the same CAS latency. For optimum compatibility, we recommend
  • Asus P8P67 DELUXE | User Manual - Page 25
    DIMM socket support (Optional) 1 DIMM 2 DIMM 4 DIMM • • * The above QVL is for the DDR3 2200 MHz memory module. Due to CPU behavior, DDR3 socket support (Optional) 1 DIMM 2 DIMM 4 DIMM • • • • • • • • • • • • • • • • • • • P8P67 Deluxe Motherboard Qualified Vendors Lists (
  • Asus P8P67 DELUXE | User Manual - Page 26
    P8P67 Deluxe Motherboard Qualified Vendors Lists support (Optional) 1 DIMM 2 DIMM 4 DIMM • • • • • • • * T he above QVL is for the DDR3 1800 MHz memory module. Due to CPU NO. - Timing Voltage DIMM socket support (Optional) 1 DIMM 2 DIMM 4 DIMM 9-9-9-24 1.55~1.75 • • • 8-8-8-24 1.65
  • Asus P8P67 DELUXE | User Manual - Page 27
    -E 9 DIMM socket support Voltage (Optional) 1 DIMM 2 DIMM 4 DIMM - • • • - • • • - • • • - • • • 1.5 • • • 1.1 • • 1.5 • • • - • • • - • • • - • • • 1.65 • • • - • • • - • • • - • • • - • • • - • • • - • • • ASUS P8P67 Deluxe 2-9
  • Asus P8P67 DELUXE | User Manual - Page 28
    P8P67 Deluxe Motherboard Qualified Vendors Lists (QVL) DDR3 1333 MHz capability (continued) Vendor Part No. Size ELPIDA EBJ21UE8BDF0-DJ-F 2GB SS/ DS Chip Brand Chip NO. DS ELPIDA J1108BDSE-DJ-F Timing - DIMM socket support • • • • • • • • • • • • • • • • • • 2-10 Chapter
  • Asus P8P67 DELUXE | User Manual - Page 29
    P8P67 Deluxe Motherboard Qualified Vendors Lists (QVL) DDR3 1333 MHz capability (continued) Vendor Part No. ASUS ATP ATP ATP ATP N/A AQ28M64A8BJH9S AQ28M72D8BJH9S 9 1GB SS NANYA NT5CB128M8AN-CG - 2GB DS NANYA NT5CB128M8AN-CG - DIMM socket support Voltage (Optional) 1 DIMM 2 DIMM 4 DIMM
  • Asus P8P67 DELUXE | User Manual - Page 30
    of Dual-channel memory configuration. • ASUS exclusively provides hyper DIMM support function. • Hyper DIMM support is subject to the physical characteristics of individual CPUs. Load the X.M.P. or D.O.C.P. settings in the BIOS for the hyper DIMM support. • Visit the ASUS website for the latest QVL
  • Asus P8P67 DELUXE | User Manual - Page 31
    damage motherboard components. Chapter 2 1 2 3 ® 4 P8P67 DELUXE 5 6 7 RESET Slot compatible with PCIe x1 and x4 devices) VGA configuration Single VGA/PCIe card Dual VGA/PCIe card PCI Express operating mode PCIe 2.0 x16_1 x16 (Recommend for single VGA) x8 PCIe 2.0 x16_2 N/A x8 ASUS P8P67 Deluxe
  • Asus P8P67 DELUXE | User Manual - Page 32
    single VGA card page 2-30 for details. IRQ assignments for this motherboard A B C D E F G H Intel PCH SATA Controller #0 Intel PCH - - Renesas Electronics USB 3.0 #1 shared - - - - - - - Renesas Electronics USB 3.0 #2 - - shared - - - - - Intel 82579 LAN - shared - - -
  • Asus P8P67 DELUXE | User Manual - Page 33
    who continually change settings to enhance system performance. 1. Power-on switch The motherboard comes with a motherboard component. The illustration below shows the location of the onboard power-on switch. 2. Reset switch Press the reset switch to reboot the system. Chapter 2 ASUS P8P67 Deluxe
  • Asus P8P67 DELUXE | User Manual - Page 34
    press the MemOK! switch to boot and load BIOS default settings. A messgae will appear during POST reminding you that the BIOS has been restored to its default settings. • We recommend that you download and update to the latest BIOS version from the ASUS website at www.asus.com after using the MemOK
  • Asus P8P67 DELUXE | User Manual - Page 35
    function will be activated after the next system bootup. • You may use the TurboV and Auto Tuning feature in the TurboV EVO application, adjust the BIOS setup program, or enable the TPU switch at the same time. However, the system will use the last setting you have made. ASUS P8P67 Deluxe 2-17
  • Asus P8P67 DELUXE | User Manual - Page 36
    to Enable when the system is powered off. • The EPU LED (O2LED2) near the EPU switch lights when the switch setting is turned to Enable. Refer to section 2.2.6 Onboard LEDs for the exact location of the EPU LED. • If you change the switch setting to Enable under the OS environment, the EPU function
  • Asus P8P67 DELUXE | User Manual - Page 37
    LED next to the error device will continue lighting until the problem is solved. This user-friendly design provides an intuitional way to locate the root problem within a second. 2. ID LEDs The ID LEDs provide an elegant embellishment to the motherboard design. Chapter 2 ASUS P8P67 Deluxe 2-19
  • Asus P8P67 DELUXE | User Manual - Page 38
    3. TPU LED The TPU LED lights when the TPU switch is turned to Enable. 4. EPU LED The EPU LED lights when the EPU switch is turned to Enable. Chapter 2 2-20 Chapter 2: Hardware information
  • Asus P8P67 DELUXE | User Manual - Page 39
    not loaded PEI Core is started Pre-memory CPU initialization is started Pre-memory System Agent initialization is started Pre-memory PCH initialization is started OEM pre-memory initialization codes Memory initialization Reserved for ASL (see ASL Status Codes section below) ASUS P8P67 Deluxe 2-21
  • Asus P8P67 DELUXE | User Manual - Page 40
    incompatible memory speed Unspecified memory initialization error Memory not installed Invalid CPU type or Speed CPU mismatch CPU self test failed or possible CPU cache error CPU micro-code is not found or micro-code update is failed Internal CPU error Reset PPI is not available Reserved for future
  • Asus P8P67 DELUXE | User Manual - Page 41
    USB Enable Reserved for future AMI codes IDE initialization is started IDE Reset IDE Detect IDE Enable SCSI initialization is started SCSI Reset SCSI Detect SCSI Enable Setup Verifying Password Start of Setup Reserved for ASL (see ASL Status Codes section below) Setup Input Wait ASUS P8P67 Deluxe
  • Asus P8P67 DELUXE | User Manual - Page 42
    Boot Services event Runtime Set Virtual Address MAP Begin Runtime Set Virtual Address MAP End Legacy Option ROM Initialization System Reset USB hot plug PCI bus hot plug Clean-up of NVRAM Configuration Reset (reset of NVRAM settings) Reserved for future AMI codes OEM BDS initialization codes CPU
  • Asus P8P67 DELUXE | User Manual - Page 43
    BIOS to [AHCI Mode]. Refer to section 3.5.4 SATA Configuration for details. • You must install Windows® XP Service Pack 3 or later versions before using Serial ATA hard disk drives. The Serial ATA RAID feature is available only if you are using Windows® XP SP3 or later versions. ASUS P8P67 Deluxe
  • Asus P8P67 DELUXE | User Manual - Page 44
    , refer to section 4.4 RAID configurations or the manual bundled in the motherboard support DVD. • When using NCQ, set the SATA Mode in the BIOS to [AHCI Mode]. Refer to section 3.5.4 SATA Configuration for details. • You must install Windows® XP Service Pack 3 or later versions before using Serial
  • Asus P8P67 DELUXE | User Manual - Page 45
    the motherboard support DVD and load the driver during OS installation. For 32/64bit Windows XP OS, load first the Marvell shared library driver, and then load Marvell 91xx SATA Controller Driver. For Windows Vista / Windows 7 OS, load only the Marvell 91xx SATA Controller Driver. ASUS P8P67 Deluxe
  • Asus P8P67 DELUXE | User Manual - Page 46
    connectors. Doing so will damage the motherboard! You can connect the front panel USB cable to the ASUS Q-Connector (USB, blue) first, and then install the Q-Connector (USB) to the USB connector onboard if your chassis supports front panel USB ports. The USB 2.0 module is purchased separately. 2-28
  • Asus P8P67 DELUXE | User Manual - Page 47
    pin SPDIF_OUT) This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port(s). Connect the S/PDIF Out module cable to this connector, then install the module to a slot opening at the back of the system chassis. The S/PDIF module is purchased separately. ASUS P8P67 Deluxe 2-29
  • Asus P8P67 DELUXE | User Manual - Page 48
    • The CPU_FAN connector supports the CPU fan of maximum 1A (12 W) fan power. • Only the CPU_FAN, CHA_FAN 1 and CHA_FAN 2 connectors support the ASUS FAN Xpert feature. • If you install two VGA cards, we recommend that you plug the rear chassis fan cable to the motherboard connector labeled CHA_FAN1
  • Asus P8P67 DELUXE | User Manual - Page 49
    HD]. 10. ATX power connectors (24-pin EATXPWR; 8-pin EATX12V) These connectors are for ATX power supply plugs. The power supply plugs are designed to fit these connectors in only one orientation. Find the proper orientation and push down firmly until the connectors completely fit. ASUS P8P67 Deluxe
  • Asus P8P67 DELUXE | User Manual - Page 50
    ATX 12 V Specification 2.0 (or later version) and provides a minimum power of 350 W. • Do not forget to connect the 4-pin/8-pin EATX12 V power plug; otherwise, the system will not boot http://support.asus. com/PowerSupplyCalculator/PSCalculator.aspx?SLanguage=en-us for details. PSU Suggested List
  • Asus P8P67 DELUXE | User Manual - Page 51
    depending on the BIOS settings. Pressing the power switch for more than four seconds while the system is ON turns the system OFF. • Reset button (2-pin RESET) This 2-pin connector is for the chassis-mounted reset button for system reboot without turning off the system power. ASUS P8P67 Deluxe 2-33
  • Asus P8P67 DELUXE | User Manual - Page 52
    tools and components to build a PC system 1 bag of screws Philips (cross) screwdriver PC chassis Power supply unit Intel LGA 1155 CPU Intel LGA 1155 compatible CPU Fan DIMM SATA hard disk drive SATA optical disc drive (optional) Graphics card (optional) The tools and components in
  • Asus P8P67 DELUXE | User Manual - Page 53
    Chapter 2 2.3.2 CPU installation The LGA1156 CPU is incompatible with the LGA1155 socket. DO NOT install a LGA1156 CPU on the LGA1155 socket. 1 A B 2 3 ASUS P8P67 Deluxe 2-35
  • Asus P8P67 DELUXE | User Manual - Page 54
    4 Chapter 2 5 C A B 6 2-36 Chapter 2: Hardware information
  • Asus P8P67 DELUXE | User Manual - Page 55
    Chapter 2 2.3.3 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary. To install the CPU heatsink and fan assembly 1 A B 2 B A 3 4 ASUS P8P67 Deluxe 2-37
  • Asus P8P67 DELUXE | User Manual - Page 56
    To uninstall the CPU heatsink and fan assembly 1 2 B A B A Chapter 2 2-38 Chapter 2: Hardware information
  • Asus P8P67 DELUXE | User Manual - Page 57
    2.3.4 1 DIMM installation 2 Chapter 2 3 To remove a DIMM B A ASUS P8P67 Deluxe 2-39
  • Asus P8P67 DELUXE | User Manual - Page 58
    2.3.5 1 Motherboard installation The diagrams in this section are for reference only. The motherboard layout may vary with models, but the installation steps remain the same. 2 Chapter 2 2-40 Chapter 2: Hardware information
  • Asus P8P67 DELUXE | User Manual - Page 59
    3 Chapter 2 DO NOT overtighten the screws! Doing so can damage the motherboard. ASUS P8P67 Deluxe 2-41
  • Asus P8P67 DELUXE | User Manual - Page 60
    2.3.6 1 ATX Power connection 2 OR OR Chapter 2 2-42 Chapter 2: Hardware information
  • Asus P8P67 DELUXE | User Manual - Page 61
    2.3.7 1 SATA device connection OR 2 OR Chapter 2 ASUS P8P67 Deluxe 2-43
  • Asus P8P67 DELUXE | User Manual - Page 62
    2.3.8 Front I/O Connector To install ASUS Q-Connector 1 2 IDE_LED+ IDE_LED- IDE_LED PWR Ground Reset Ground POWER SW RESET SW To install USB 2.0 Connector To install front panel audio connector Chapter 2 USB 2.0 To install USB 3.0 Connector USB 3.0 2-44 AAFP Chapter 2: Hardware
  • Asus P8P67 DELUXE | User Manual - Page 63
    2.3.9 Expension Card installation To install PCIe x16 cards To install PCIe x1 cards To install PCI cards Chapter 2 ASUS P8P67 Deluxe 2-45
  • Asus P8P67 DELUXE | User Manual - Page 64
    External SATA port 12. IEEE 1394a port 13. USB 2.0 ports 1 and 2 14. USB 3.0 ports 1 and 2 15. Clear CMOS switch 16. Audio I/O ports*** *, ** and ***: Refer to the tables on the next page for bluetooth module LED, LAN port LED, and audio port definitions. 2-46 Chapter 2: Hardware information
  • Asus P8P67 DELUXE | User Manual - Page 65
    set the JMB Storage Controller item in the BIOS setting to [Enabled] and install the JMicron JMB36X Controller Driver from the motherboard support DVD. Refer to section 3.5.6 Onboard Devices Configuration for details. * Bluetooth module LED Rear Speaker Out Side Speaker Out ASUS P8P67 Deluxe 2-47
  • Asus P8P67 DELUXE | User Manual - Page 66
    Chapter 2 2.3.11 Audio I/O connections Audio I/O ports Connect to Headphone and Mic Connect to Stereo Speakers Connect to 2.1 channel Speakers 2-48 Chapter 2: Hardware information
  • Asus P8P67 DELUXE | User Manual - Page 67
    Connect to 4.1 channel Speakers Connect to 5.1 channel Speakers Chapter 2 Connect to 7.1 channel Speakers When the DTS Surround Sensation UltraPC function is enabled, ensure to connect the rear speaker to the gray port. ASUS P8P67 Deluxe 2-49
  • Asus P8P67 DELUXE | User Manual - Page 68
    may light up or change from orange to green after the system LED turns on. The system then runs the power-on self tests or POST. While the tests are running, the BIOS beeps (refer to the BIOS beep codes table below) or additional messages appear on the screen. If you do not see anything within 30
  • Asus P8P67 DELUXE | User Manual - Page 69
    to boot after changing any BIOS setting, try to clear the CMOS and reset the motherboard to the default value. �S�e�e��s�e��c�ti�o�n� 2.3.10 Rear Panel connection for information on how to erase the RTC RAM. • The BIOS setup program does not support the bluetooth devices. The BIOS setup program
  • Asus P8P67 DELUXE | User Manual - Page 70
    Displays the CPU/motherboard temperature, CPU/5V/3.3V/12V voltage output, CPU/chassis/power fan speed Exits the BIOS setup program without saving the changes, saves the changes and resets the system, or enters the Advanced Mode EFI BIOS Utility - EZ Mode Monday [9/13/2010] P8P67 DELUXE BIOS
  • Asus P8P67 DELUXE | User Manual - Page 71
    the advanced system settings For displaying the system temperature, power status, and changing the fan settings. For changing the system boot configuration For configuring options for special functions For selecting the exit options and loading default settings Chapter 3 ASUS P8P67 Deluxe 3-3
  • Asus P8P67 DELUXE | User Manual - Page 72
    or use the USB mouse to click this button to return to the previous menu screen. Submenu items A greater than sign (>) before each item on any menu screen means that the item has a submenu. To display the submenu, select the item and press . Pop-up window Select a menu item and press
  • Asus P8P67 DELUXE | User Manual - Page 73
    ) RAM to clear the BIOS password. See section 2.3.10 Rear panel connectors for information on how to erase the RTC RAM. • The Administrator or User Password items on top of the screen show the default Not Installed. After you set a password, these items show Installed. Chapter 3 ASUS P8P67 Deluxe
  • Asus P8P67 DELUXE | User Manual - Page 74
    be able to see or change only selected fields in the BIOS setup program. To set an administrator password: 1. Select the Administrator Password item and After you clear the password, the Administrator Password item on top of the screen shows Not Installed. User Password If you have set a user
  • Asus P8P67 DELUXE | User Manual - Page 75
    items. Be cautious when changing the settings of the Ai Tweaker menu items. Incorrect field values can cause the system to malfunction. The configuration options for this section vary depending on the CPU and DIMM model you installed on the motherboard. EFI BIOS Utility - Advanced Mode Exit Main
  • Asus P8P67 DELUXE | User Manual - Page 76
    to achieve the desired CPU internal frequency. Select any of these preset overclocking configuration options: [Auto] Loads the optimal settings for the system. [Manual] Allows you to individually set overclocking parameters. [X.M.P.] If you install memory modules supporting the eXtreme Memory
  • Asus P8P67 DELUXE | User Manual - Page 77
    processor cores to run faster than marked frequency in specific condition. [Disabled] Disables this function. The following five items appear only when you set the Enhanced Intel SpeedStep Technology and Turbo Mode items to [Enabled]. Turbo Ratio [Auto] Allows you to manually adjust the Trubo CPU
  • Asus P8P67 DELUXE | User Manual - Page 78
    ] Proceeds phase control depending on the CPU loading. [Optimized] Loads the ASUS optimized phase tuning profile. [Extreme] Proceeds the full phase mode. [Manual Adjustment] Allows manual adjustment. Manual Adjustment [Medium] This item appears only when you set the Phase Control item to
  • Asus P8P67 DELUXE | User Manual - Page 79
    to set the DRAM voltage. The values range from 1.20V to 2.20V with a 0.00625V interval. According to Intel CPU spec, DIMMs with voltage requirement over 1.65V may damage the CPU permanently. We recommend you install the DIMMs with the voltage requirement below 1.65V. Chapter 3 ASUS P8P67 Deluxe
  • Asus P8P67 DELUXE | User Manual - Page 80
    set the VCCIO voltage. The values range from 0.80V to 1.70V with a 0.00625V interval. CPU PLL Voltage [Auto] Allows you to set the CPU settings. Black CPU Manual Voltage 0.8V-1.22V CPU Offset Voltage DRAM Voltage VCCSA Voltage VCCIO Voltage CPU 06875V 1.16000V- 1.20000V Red 1.340V-1.990V 0.180V-0.
  • Asus P8P67 DELUXE | User Manual - Page 81
    Monitor Boot Tool CPU Configuration Parameters →←: Select Screen ↑↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F5: Optimized Defaults F10: Save ESC: Exit Version 2.00.1201. Copyright (C) 2010 American Megatrends, Inc. Chapter 3 ASUS P8P67 Deluxe 3-13
  • Asus P8P67 DELUXE | User Manual - Page 82
    4 Supported 16-31 31 CPU Ratio Auto Intel Adaptive Thermal Monitor Enabled Hyper-threading Enabled Active Processor Cores All Limit CPUID Maximum Disabled Execute Disable Bit Enabled Intel Virtualization Technology Disabled Enhanced Intel SpeedStep Technology Enabled Boot
  • Asus P8P67 DELUXE | User Manual - Page 83
    should be enabled in order to enable the Enhanced Halt State. [Disabled] Disables this function. CPU C3 Report [Disabled] Allows you to disable or enable the CPU C3 report to OS. CPU C6 Report [Enabled] Allows you to disable or enable the CPU C6 report to OS. Chapter 3 ASUS P8P67 Deluxe 3-15
  • Asus P8P67 DELUXE | User Manual - Page 84
    Not Present if no SATA device is installed to the corresponding SATA port. EFI BIOS Utility - Advanced Mode Exit Main Back SATA 3G 3 (Blue) ASUS CB-521 ATAPI SATA 3G 4 (Blue) Not Present SATA 3G 5 (Blue) Not Present SATA 3G 6 (Blue) Not Present Boot Tool (1) IDE Mode. (2)
  • Asus P8P67 DELUXE | User Manual - Page 85
    [Enabled] S.M.A.R.T. (Self-Monitoring, Analysis and Reporting Technology) is a monitor system. When read/write of your hard disk errors occur, this feature allows the hard disk to report warning messages during the POST. Configuration options: [Enabled] [Disabled] Chapter 3 ASUS P8P67 Deluxe 3-17
  • Asus P8P67 DELUXE | User Manual - Page 86
    USB-related features. EFI BIOS Utility - Advanced Mode Exit Main Back Ai Tweaker Advanced Advanced\ USB Configuration > Monitor USB Configuration USB Devices: 1 Mouse Legacy USB Support Enabled Legacy USB3.0 Support Enabled EHCI Hand-off Disabled Boot Tool Enables Legacy USB support
  • Asus P8P67 DELUXE | User Manual - Page 87
    AC'97 or highdefinition audio depending on the audio standard that the front panel audio module supports. [HD] [AC97] Sets the front panel audio connector (AAFP) mode to high definition audio. Sets the front panel audio connector (AAFP) mode to legacy AC'97 Chapter 3 ASUS P8P67 Deluxe 3-19
  • Asus P8P67 DELUXE | User Manual - Page 88
    Controller Driver from the motherboard support DVD. JMB Storage OPROM [Enabled] This item appears only when you set the previous item to [Enabled] and allows you to enable or disable the OptionRom of the JMB storage controller. Configuration options: [Enabled] [Disabled] Display OptionRom in POST
  • Asus P8P67 DELUXE | User Manual - Page 89
    options: [Enabled] [Disabled] Change Settings [IO=3F8h; IRQ=4] Allows you to select the Serial Port base address. Configuration options: [IO=3F8h; IRQ=4] [�IO��=�2�F�8�h��; �IR��Q�=��3 IO��=�3�E���8���h I�R����Q 4�]�� [I�O��=�2�E�8�h�;�I�R�Q��=�3�]� Chapter 3 ASUS P8P67 Deluxe 3-21
  • Asus P8P67 DELUXE | User Manual - Page 90
    BIOS By Ring Disabled Power On By RTC Disabled Boot Tool Specify what state to go to Space Bar] Sets the Space Bar on the PS/2 keyboard to turn on the system. [Ctrl-Esc] Sets the Ctrl+ the system through a PCI LAN or modem card. This feature requires an ATX power supply that provides at
  • Asus P8P67 DELUXE | User Manual - Page 91
    displays the CPU, chassis, and power�f�a�n��s�p�e��e�d��in��r�o��ta�t�i�o�n�s��p�e��r�m��i�n�u�t�e��(�R�P��M I�f�t�h�e��f�a�n��is��n�o��t�c�o��n�n�e��c�te��d��to��t�h�e� motherboard, the field shows N/A. Select Ignore if you do not wish to display the detected speed. Chapter 3 ASUS P8P67 Deluxe
  • Asus P8P67 DELUXE | User Manual - Page 92
    minimize the fan speed for quiet CPU fan operation. [Turbo] Sets to [Turbo] to achieve maximum CPU fan speed. [Manual] Sets to [Manual] to assign detailed fan speed control parameters. The following four items appear only when you set CPU Fan Profile to [Manual]. CPU Upper Temperature [70] Use the
  • Asus P8P67 DELUXE | User Manual - Page 93
    set Chassis Fan Profile to [Manual]. Chassis Upper Temperature [70] Use the and keys to adjust the upper limit of the CPU temperature Support [Enabled] This item allows you to enable or disable the Anti Surge function. Configuration options: [Disabled] [Enabled] Chapter 3 ASUS P8P67 Deluxe
  • Asus P8P67 DELUXE | User Manual - Page 94
    feature. [Disabled] Disables the full screen logo display feature. Set this item to [Enabled] to use the ASUS MyLogo 2™ feature. Option ROM Messages [Force BIOS] [Force BIOS] The third-party ROM messages will be forced to display during the boot sequence. [Keep Current] The third-party ROM
  • Asus P8P67 DELUXE | User Manual - Page 95
    of devices installed in the system. • To select the boot device during system startup, press when ASUS Logo appears. • To access Windows OS in Safe Mode, do any of the following: - Press when ASUS Logo appears. - Press after POST. Boot Override These items displays the available
  • Asus P8P67 DELUXE | User Manual - Page 96
    that saved your BIOS settings, press , and then select Yes. • DO NOT shut down or reset the system while updating the BIOS to prevent the system boot failure! • We recommend that you update the BIOS file only coming from the same memory/CPU configuration and BIOS version. Chapter 3 3-28
  • Asus P8P67 DELUXE | User Manual - Page 97
    hard disk will be erased for EZ Backup setup. Drive Xpert Device(s) List: SATA 6G E1 (Navy Blue) / SATA 6G E2 (Navy Blue) Press to display the information of the hard disks which are connected to the SATA6G_E1 and SATA6G_E2 connectors on the motherboard. Chapter 3 ASUS P8P67 Deluxe 3-29
  • Asus P8P67 DELUXE | User Manual - Page 98
    BIOS items, and save or discard your changes to the BIOS items. You can access the EZ Mode from the Exit menu. Exit Load Optimized Defaults Save Changes & Reset Discard Changes & Exit ASUS press , a confirmation window appears. Select Yes to discard changes and exit�. ASUS EZ Mode This option
  • Asus P8P67 DELUXE | User Manual - Page 99
    Provider (ISP). Launching ASUS Update After installing AI Suite II from the motherboard support DVD, launch ASUS Update by clicking Update > ASUS Update on the AI Suite II main menu bar. Quit all Windows® applications before you update the BIOS using this utility. Chapter 3 ASUS P8P67 Deluxe 3-31
  • Asus P8P67 DELUXE | User Manual - Page 100
    download. Click Next. Chapter 3 4. You can decide whether to change the BIOS boot logo, which is the image appearing on screen during the Power‑On Self-Tests (POST). Click Yes if you want to change the boot logo or No to continue. 5. Follow the onscreen instructions to complete the update process
  • Asus P8P67 DELUXE | User Manual - Page 101
    instructions to complete the update process. • The screenshots in this section are for reference only. The actual BIOS information vary by models. • Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. ASUS P8P67 Deluxe
  • Asus P8P67 DELUXE | User Manual - Page 102
    ��p�p�r�o�g�r�a�m��.�G��o�t�o��th�e� Tool menu to select ASUS EZ Flash Utility and press to enable it. ASUSTek EZ Flash 2 BIOS ROM Utility V00.75 Flash Info MODEL: P8P67 DELUXE fs0:\ Drive fs0:\ fs1:\ VER: 0239 Folder Info 08/05/10 10:23p 4194304 Exit DATE: 10/07/2010 P8P67D.ROM File
  • Asus P8P67 DELUXE | User Manual - Page 103
    you to enter BIOS Setup to recover BIOS setting. To ensure system compatibility and stability, we recommend that you press to load default BIOS values. DO NOT shut down or reset the system while updating the BIOS! Doing so can cause system boot failure! Chapter 3 ASUS P8P67 Deluxe 3-35
  • Asus P8P67 DELUXE | User Manual - Page 104
    . The actual utility screen displays may not be same as shown. Before updating BIOS 1. Prepare the motherboard support DVD and a USB flash drive in FAT32/16 format and single partition. 2. Download the latest BIOS file and BIOS Updater from the ASUS website at http:// support.asus.com and save them
  • Asus P8P67 DELUXE | User Manual - Page 105
    to the DOS prompt. ASUSTek BIOS Updater for DOS V1.18 [2010/04/29] Current ROM BOARD: P8P67 DELUXE VER: 0204 DATE: 08/05/2010 Update ROM BOARD: Unknown VER: Unknown DATE: Unknown PATH: A:\ BIOS backup is done! Press any key to continue. Note Saving BIOS: Chapter 3 ASUS P8P67 Deluxe 3-37
  • Asus P8P67 DELUXE | User Manual - Page 106
    NOT shut down or reset the system while updating the BIOS to prevent system boot failure! • For BIOS Updater version 1.04 or later, the utility automatically exits to the DOS prompt after updating BIOS. • Ensure to load the BIOS default settings to ensure system compatibility and stability. Select
  • Asus P8P67 DELUXE | User Manual - Page 107
    that the motherboard supports. Click an item to install The Make Disk menu contains items to create the RAID/AHCI driver disk. The Manual menu contains the list of supplementary user manuals. Click an item to open the folder of the user manual. Click the Contact tab to display the ASUS contact
  • Asus P8P67 DELUXE | User Manual - Page 108
    are in Portable Document Format (PDF). Install the Adobe® Acrobat® Reader from the Utilities menu before opening the files. 1. Click the Manual tab. Click ASUS Motherboard Utility Guide from the manual list on the left. 2. The Manual folder of the support DVD appears. Double-click the folder of your
  • Asus P8P67 DELUXE | User Manual - Page 109
    system, to update the motherboard BIOS, to display the system information, and to customize the settings of AI Suite II. Chapter 4 Click to customize the interface settings Click to show the system information Click to update the motherboard BIOS Click to monitor sensors or CPU frequency Click to
  • Asus P8P67 DELUXE | User Manual - Page 110
    + VRM ASUS DIGI+ VRM allows you to adjust VRM voltage and frequency modulation to enhance reliability and stability. It also provides the highest power efficiency, generating less heat to longer component lifespan and minimize power loss. After installing AI Suite II from the motherboard support DVD
  • Asus P8P67 DELUXE | User Manual - Page 111
    . Launching BT GO! After installing AI Suite II from the motherboard support DVD, launch BT GO! by clicking Tool > BT GO! on the AI Suite II main menu bar. Using BT GO! Device list Function list Lights when the function is enabled Click to show the corresponding setting pane on the right side
  • Asus P8P67 DELUXE | User Manual - Page 112
    4.3.4 TurboV EVO ASUS TurboV EVO introduces TurboV that allows you to manually adjust the CPU frequency and related voltages as well as Auto Tuning function that offers automatic and easy overlocking and system level up. After installing AI Suite II from the motherboard support DVD, launch TurboV
  • Asus P8P67 DELUXE | User Manual - Page 113
    tab. 2. Click the ON button to activate CPU Ratio. 3. You will requested to restart the system. Click Yes to make the change take effect. CPU Ratio Click to restore all start-up settings ASUS P8P67 Deluxe Click to activate the CPU Ratio Applies all changes immediately Undoes all changes without
  • Asus P8P67 DELUXE | User Manual - Page 114
    Adjustment bar • Set the CPU Ratio Setting item in BIOS to [Auto] before using the CPU Ratio function in TurboV. Refer to Chapter 3 of your motherboard user manual for details. • The CPU Ratio bars show the status of the CPU cores, which vary with your CPU model. Auto Tuning ASUS TurboV EVO includes
  • Asus P8P67 DELUXE | User Manual - Page 115
    . 3. TurboV automatically overclocks the CPU and memory and restarts the system. After re-entering Windows, a message appears indicating the BIOS settings and restarts the system. After re-entering Windows, a message appears indicating auto tuning success. Click OK to exit. ASUS P8P67 Deluxe
  • Asus P8P67 DELUXE | User Manual - Page 116
    by configuring settings like CPU frequency, GPU frequency, vCore Voltage, and Fan Control. Launching EPU After installing AI Suite II from the motherboard support DVD, launch EPU by clicking Tool > EPU on the AI Suite II main menu bar. Displays the following message if no VGA power saving engine
  • Asus P8P67 DELUXE | User Manual - Page 117
    installing AI Suite II from the motherboard support the settings Click to discard the settings Fan setting • CPU fan profile under certain limitations. Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. ASUS P8P67 Deluxe
  • Asus P8P67 DELUXE | User Manual - Page 118
    of any problem with these components. Probe II senses fan rotations, CPU temperature, and system voltages, among others. With this utility, you are assured that your computer is always at a healthy operating condition. Launching Probe II After installing AI Suite II from the motherboard support DVD
  • Asus P8P67 DELUXE | User Manual - Page 119
    for Windows XP Configuration options Control settings window Information button Exit button Minimize button Chapter 4 Information button Refer to the software manual in the support DVD or visit the ASUS website at www.asus.com for detailed software configuration. ASUS P8P67 Deluxe 4-13
  • Asus P8P67 DELUXE | User Manual - Page 120
    4.4 RAID configurations The motherboard supports the following SATA RAID solutions: • Intel® Rapid Storage Technology with RAID 0, RAID 1, RAID 10 and RAID 5 support. • Mavell® RAID utility with RAID 0 and RAID 1 support. • You must install Windows® XP Service Pack 3 or later versions before using
  • Asus P8P67 DELUXE | User Manual - Page 121
    to chipset limitation, when set any of SATA ports to RAID mode, all SATA ports run at RAID mode together. 4.4.4 Intel® Rapid Storage Technology Option ROM utility To enter the Intel® Rapid Storage Technology Option ROM utility: 1. Turn on the system. 2. During POST, press + to display
  • Asus P8P67 DELUXE | User Manual - Page 122
    supports maximum four hard disk drives for RAID configuration. Creating a RAID set To create a RAID set: 1. From the utility main menu, select 1. Create RAID Volume and press . The following screen appears: Intel(R) Rapid Storage Technology - Option ROM - v10.0.0.1032 Copyright(C) 2003-10
  • Asus P8P67 DELUXE | User Manual - Page 123
    selection. 6. Use the up/down arrow key to select the stripe size for the RAID array (for RAID 0, 10 and 5 only),and then press . The available stripe size values range from 4KB to 128KB. The following main menu, or to go back to the CREATE VOLUME menu. Chapter 4 ASUS P8P67 Deluxe 4-17
  • Asus P8P67 DELUXE | User Manual - Page 124
    set. To delete a RAID set: 1. From the utility main menu, select 2. Delete RAID Volume and press . The following screen appears: Intel(R) Rapid Storage Technology - Option ROM - v10.0.0.1032 Copyright(C) 2003-10 Intel to the utility main menu. 4-18 Chapter 4: Software support Chapter 4
  • Asus P8P67 DELUXE | User Manual - Page 125
    motherboard user manual for the exact location of the Marvell SATA 6.0 Gb/s connector. To enter the Marvell utility, press + during POST press . Marvell BIOS Setup (c) 2009 Marvell Type : Status : Size : Feature Support : Current Speed : Model : ASUS P8P67 Deluxe 4-19
  • Asus P8P67 DELUXE | User Manual - Page 126
    Marvell BIOS Setup (c) 2009 Marvell to move the selection bar and press to configure further RAID settings. RAID Level: Select a RAID Level. Configuration options: [RAID 0] for applications requiring large data transfers such as audio, video, and graphics. A smaller stripe size support
  • Asus P8P67 DELUXE | User Manual - Page 127
    message appears: Exit Do you want to exit from Marvell BIOS Setup? Yes No Press to save the RAID setting and exit the Marvell RAID utility. Delete an existing RAID 8 ▶ ▶ Help Delete the selected virtual disk. ENTER: Operation F10: Exit/Save ESC: Return Chapter 4 ASUS P8P67 Deluxe 4-21
  • Asus P8P67 DELUXE | User Manual - Page 128
    to delete the Master Boot Record (MBR) from the selected RAID array. 3. Press . The following warning message appears: Exit Do you want to exit from Marvell BIOS Setup? Yes No Press to save the RAID setting and exit the Marvell RAID utility. Chapter 4 4-22 Chapter 4: Software support
  • Asus P8P67 DELUXE | User Manual - Page 129
    then click Intel AHCI/RAID Driver Disk to create a RAID driver disk. 5. Select USB floppy disk drive as the destination disk. 6. Follow the succeeding screen instructions to complete the process. Write-protect the floppy disk to avoid a computer virus infection. Chapter 4 ASUS P8P67 Deluxe 4-23
  • Asus P8P67 DELUXE | User Manual - Page 130
    screen instructions to complete the installation. To install the RAID driver for Windows® Vista or later OS: 1. During the OS installation, click Load Driver to allow you to select the installation media containing the RAID driver. 2. Insert the USB flash drive with RAID driver into the USB port
  • Asus P8P67 DELUXE | User Manual - Page 131
    . 4. Click Details tab. The Vendor ID (VID) and Product ID (PID) are displayed. 5. Browse the contents of the RAID driver disk to locate the file txtsetup.oem. 6. Double-click the file. A window appears, allowing you to select the program for opening the oem file. Chapter 4 ASUS P8P67 Deluxe 4-25
  • Asus P8P67 DELUXE | User Manual - Page 132
    "usbstor" [HardwareIds.scsi.iaStor_DesktopWorkstationServer] id= "PCI\VEN_8086&DEV_2822&CC_0104","iaStor" id= "USB\VID_03EE&PID_6901", "usbstor" Add the same line to both sections. The VID and PID vary with different vendors. 10. Save and exit the file. 4-26 Chapter 4: Software support Chapter 4
  • Asus P8P67 DELUXE | User Manual - Page 133
    . 2. For Windows XP, go to Control Panel > Add/Remove Programs. For Windows Vista, go to Control Panel > Programs and Features. 3. Select your current graphics card driver/s. 4. For Windows XP, select Add/Remove. For Windows Vista, select Uninstall. 5. Turn off your computer. ASUS P8P67 Deluxe 5-1
  • Asus P8P67 DELUXE | User Manual - Page 134
    layout may vary with models, but the installation steps remain the same. 1. Prepare two CrossFireX-ready graphics cards. 2. Insert the two graphics card into the PCIEX16 slots. If your motherboard has more than two PCIEX16 slots, refer to Chapter 2 in this user manual VGA or a DVI cable
  • Asus P8P67 DELUXE | User Manual - Page 135
    1. In the Catalyst Control Center window, click Graphics Settings > CrossFireX > Configure. 2. From the Graphics Adapter list, select the graphics card to act as the display GPU. 1 3. Select Enable CrossFireX. 4. Click Apply, and then click OK to exit the window. 2 3 4 ASUS P8P67 Deluxe 5-3
  • Asus P8P67 DELUXE | User Manual - Page 136
    for the latest certified graphics card and supported 3D application list. 5.2.2 Installing two SLI-ready graphics cards The following pictures are for reference only. The graphics cards and the motherboard layout may vary with models, but the installation steps remain the same. 1. Prepare two SLI
  • Asus P8P67 DELUXE | User Manual - Page 137
    card driver supports the NVIDIA® SLI™ technology. Download the latest driver from the NVIDIA website (www.nvidia.com). 5.2.4 Enabling the NVIDIA® SLI™ technology After installing your graphics cards and the device drivers, enable the SLI feature in NVIDIA® Control Panel under the Windows® Vista
  • Asus P8P67 DELUXE | User Manual - Page 138
    Chapter 5 B1. If you cannot see the NVIDIA Control Panel item in step (A), select Personalize. B2. From the Personalization window, select Display Settings. B3. From the Display Settings dialog box, click Advanced Settings. 5-6 Chapter 5: Multiple GPU technology support
  • Asus P8P67 DELUXE | User Manual - Page 139
    Start the NVIDIA Control Panel. Chapter 5 B5. The NVIDIA Control Panel window appears. Enabling SLI settings From the NVIDIA Control Panel window, select Set SLI Configuration. Click Enable SLI and set the display for viewing SLI rendered content. When done, click Apply. ASUS P8P67 Deluxe 5-7
  • Asus P8P67 DELUXE | User Manual - Page 140
    Chapter 5 5-8 Chapter 5: Multiple GPU technology support
  • Asus P8P67 DELUXE | User Manual - Page 141
    . 21-23, D-40880 Ratingen, Germany Fax +49-2102-959911 Web site www.asus.de Online contact www.asus.de/sales Technical Support Telephone Support Fax Online support +49-1805-010923* +49-2102-9599-11 support.asus.com * EUR 0.14/minute from a German fixed landline; EUR 0.42/minute from
  • Asus P8P67 DELUXE | User Manual - Page 142
    TAIWAN R.O.C. Country: TAIWAN Authorized representative in Europe: ASUS COMPUTER GmbH Address, City: HARKORT STR. 21-23, 40880 RATINGEN Country: GERMANY declare the following apparatus: Product name : Mother Board Model name : P8P67 DELUXE conform with the essential requirements of the
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
Motherboard
P8P67
Deluxe