Asus PRIME Z590-P WIFI Intel 500 series Channel BIOS UM English - Page 42

Serial Port Allows you to enable or disable serial port. Configuration options: [On] [Off] The following item appears only when you set Serial Port to [On]. Change Settings Allows you to select an optimal settings for Super IO device. Configuration options: [IO=3F8h; IRQ=4] [IO=2F8h; IRQ=3] [IO=3E8h; IRQ=4] [IO=2E8h; IRQ=3] 7.13 APM Configuration The items in this menu allow you to adjust the Advanced Power Management (APM) settings. Restore AC Power Loss Allows you to select the AC power state when power is re-applied after a power failure. Configuration options: [Power On] [Power Off] [Last State] CEC Ready When this item is set to [Enabled], the system will comply with CEC (California Energy Commission) regulations and save more power under S0 state. Configuration options: [Disabled] [Enabled] Energy Star Ready Configuration options: [Disabled] [Enabled] ErP Ready Allows you to switch off some power at S4/S5 to get the system ready for ErP requirement. When this item is set to [Enabled], all other PME options will be switched off. RGB LEDs and RGB/Addressable RGB headers will also be disabled. Configuration options: [Disabled] [Enable(S4+S5)] [Enable(S5)] Power On By PS/2 Keyboard Allows you to enable or disable power-on by your PS/2 keyboard, or to select a way to switch the power on using your PS/2 keyboard. Configuration options: [Disabled] [Space Bar] [Ctrl-Esc] [Power Key] 42 PRIME / TUF GAMING Intel® 500 Series BIOS Manual