Asus RS100-E10-PI2 User Manual - Page 100
Power & Performance, Boot performance mode [Max Non-Turbo Performance]
View all Asus RS100-E10-PI2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
BIST [Disabled] Allows you to enable or disable BIST (Built-In Self Test) on reset. Configuration options: [Disabled] [Enabled] AES [Enabled] Allows you to enable or disable AES (Advanced Encryption Standard). Configuration options: [Disabled] [Enabled] Intel Trusted Execution Technology [Disabled] Allows you to enable or disable utilization of additional hardware capabilities provided by Intel(R) Trusted Execution Technology. Changes require a full power cycle to take effect. Configuration options: [Disabled] [Enabled] 5.5.2 Power & Performance CPU - Power Management Control Boot performance mode [Max Non-Turbo Performance] This item allows you to select the performance state that the BIOS will set starting from reset vector. Configuration options: [Max Battery] [Max Non-Turbo Performance] [Turbo Performance] Intel(R) SpeedStep(tm) [Enabled] Allows more than two frequency ranges to be supported. Configuration options: [Disabled] [Enabled] Race To Halt (RTH) [Enabled] Allows you to enable or disable Race To Halt feature. RTH will dynamically increase CPU frequency in order to enter pkg C-State faster to reduce overall power. RTH is controlled through MSR 1FC bit 20. Configuration options: [Disabled] [Enabled] Intel(R) Speed Shift Technology [Disabled] Allows you to enable or disable Intel(R) Speed Shift Technology support. Enabling will expose the CPPC v2 interface to allow for hardware controlled P-states. Configuration options: [Disabled] [Enabled] HDC Control [Enabled] [Disabled] Disable HDC. [Enabled] Can be enable by OS if OS native support available. 5-14 Chapter 5: BIOS Setup