Asus RS100-E10-PI2 User Manual - Page 72
SATADOM power setting 3-pin DOM1_PWR1, CPU PCIE configuration setting 3-pin U2_CFG5-6, U2_CFG6
View all Asus RS100-E10-PI2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
8. SATADOM power setting (3-pin DOM1_PWR1) This jumper allows SATA4 to support SATADOM which do not need external power connections. Set to pins 2-3 to activate the SATA4 support feature. 9. CPU PCIE configuration setting (3-pin U2_CFG5-6) These jumpers allow you to configure the speed at which PCIE6 will run at. Refer to the table below for the different jumper configurations. Jumper Setting U2_CFG6 U2_CFG5 PCIE6 slot configuration 12 2 13 2 x126 3(Default) 1 21 2 2 32 3 x8, x8 12 2 13 2 2 3 x8, x4, x4 This jumper will be disabled when PCIE7 slot is occupied. 4-14 Chapter 4: Motherboard Information
4-14
Chapter 4: Motherboard Information
8.
SATADOM power setting (3-pin DOM1_PWR1)
This jumper allows SATA4 to support SATADOM which do not need external power
connections. Set to pins 2-3 to activate the SATA4 support feature.
9.
CPU PCIE configuration setting (3-pin U2_CFG5-6)
These jumpers allow you to configure the speed at which PCIE6 will run at. Refer to the
table below for the different jumper configurations.
Jumper Setting
U2_CFG6
U2_CFG5
PCIE6 slot configuration
2
1
2
1
x16 (Default)
2
1
3
2
x8, x8
3
2
3
2
x8, x4, x4
This jumper will be disabled when PCIE7 slot is occupied.