Asus RS100-E10-PI2 User Manual - Page 31
Hard disk drives, 2.4.1 Installing a hard disk drive to the HDD bay 1
View all Asus RS100-E10-PI2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
2.4 Hard disk drives The server chassis has two HDD bays for installing HDDs to the system. Both HDD bays can support 3.5-inch Serial ATA HDD. 2.4.1 Installing a hard disk drive to the HDD bay 1 To install a 3.5-inch Serial ATA HDD to HDD bay 1: 1. If you have an Optical Disc Drive (ODD) installed, remove it first before installing a 3.5- inch Sertial ATA HDD to HDD bay 1. To remove the ODD: 1.a Locate the ODD in the server chassis. 1.b Release the screw that secures the ODD to the chassis and set aside. HDD bay 1 1.c Push the ODD outward slightly to disconnect the SATA and power cable from the ODD. Then, remove the ODD as shown. ASUS RS100-E10-PI2 2-13
2-13
ASUS RS100-E10-PI2
2.4
Hard disk drives
The server chassis has two HDD bays for installing HDDs to the system. Both HDD bays can
support 3.5-inch Serial ATA HDD.
2.4.1
Installing a hard disk drive to the HDD bay 1
To install a 3.5-inch Serial ATA HDD to HDD bay 1:
1.
If you have an Optical Disc Drive (ODD) installed, remove it first before installing a 3.5-
inch Sertial ATA HDD to HDD bay 1.
To remove the ODD:
1.a
Locate the ODD in the server chassis.
1.b
Release the screw that secures the ODD to the chassis and set aside.
HDD bay 1
1.c
Push the ODD outward slightly to
disconnect the SATA and power cable
from the ODD. Then, remove the
ODD as shown.