Asus RS100-E10-PI2 User Manual - Page 41
Installing 2.5-inch SSDs on HDD bay 2 (Optional)
View all Asus RS100-E10-PI2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
2.4.4 Installing 2.5-inch SSDs on HDD bay 2 (Optional) To replace an installed 3.5-inch Serial ATA HDD with two 2.5-inch SSDs in HDD bay 2: 1. Locate the 3.5-inch Serial ATA HDD and the HDD drive tray assembly in the chassis. 2. Disconnect the SATA cable and power cable from the 3.5-inch SATA HDD. 3. Release the four screws that secure the HDD drive tray and 3.5-inch SATA HDD assembly to HDD bay 2 and set aside. 4. Remove the HDD drive tray and set aside. ASUS RS100-E10-PI2 2-23
2-23
ASUS RS100-E10-PI2
2.4.4
Installing 2.5-inch SSDs on HDD bay 2 (Optional)
To replace an installed 3.5-inch Serial ATA HDD with two 2.5-inch SSDs in HDD bay 2:
1.
Locate the 3.5-inch Serial ATA HDD and the HDD drive tray assembly in the chassis.
2.
Disconnect the SATA cable and power cable from the 3.5-inch SATA HDD.
3.
Release the four screws that secure the HDD drive tray and 3.5-inch SATA HDD
assembly to HDD bay 2 and set aside.
4.
Remove the HDD drive tray and set aside.