Asus RS120-E4 User Guide - Page 110

6.2 LSI Logic Embedded SATA RAID Setup Utility The LSI Logic Embedded SATA RAID Setup Utility allows you to create RAID 0 or RAID 1 set(s) from SATA hard disk drives connected to the SATA connectors supported by the motherboard Southbridge chip. The LSI Logic Embedded SATA RAID automatically configures a RAID 1 (Mirrored) set when the SATA is configured as RAID in the BIOS and you installed two hard disk drives without a RAID configuration. To enter the LSI Logic Embedded SATA RAID Setup Utility: 1. Turn on the system after installing all the SATA hard disk drives. 2. During POST, the LSI Logic Embedded SATA RAID Setup Utility automatically detects the installed SATA hard disk drives and displays any existing RAID set(s). Press + to enter the utility. LSI Logic Embedded SATA RAID BIOS Version 5.5.03031654R (C)2004 Copyright LSI Logic Corporation. ALL Rights Reserved. LSI Logic Embedded SATA RAID Found at PCI Bus No:00 Dev No:1F Scaning for Port0 ... Responding. HDS722512VLSA80 117800MB Scaning for Port1 ... Responding. HDS722512VLSA80 117800MB UDMA5 UDMA5 01 Logical drive(s) Configured. Array# Mode Stripe Size No.Of Stripes 00 Reliability 64KB(128 Sectors) 02 DriveSize Status 1143376MB Online Press Ctrl-M to run LSI Logic Embeded SATA RAID Setup Utility. You may also create a RAID set(s) in a Windows® operating environment using the Global Array Manager (GAM) application. Refer to the GAM user guide in the motherboard support CD for details. 6- Chapter 6: RAID Configuration