Asus RS120-E4 User Guide - Page 44
Reconnect all the required cables
UPC - 610839641819
View all Asus RS120-E4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
To reinstall the motherboard: 1. Firmly hold the motherboard by the sides and insert it into the chassis as shown. 2. Carefully adjust the motherboard until the rear panel ports fit in place. 3. Use a Phillips (cross) screwdriver to secure the motherboard with ten (10) screws in the holes as shown in the illustration in the previous section. 4. Reconnect all the required cables to the motherboard. See section "2.6 Cable connections" for details. 5. Reinstall all the devices that you have previously removed. 2-28 Chapter 2: Hardware setup
Chapter 2:
Hardware setup
2-28
To reinstall the motherboard:
1.
Firmly hold the motherboard by the
sides and insert it into the chassis
as shown.
2.
Carefully adjust the motherboard
until the rear panel ports fit in place.
3.
Use a Phillips (cross) screwdriver to
secure the motherboard with ten (10)
screws in the holes as shown in the
illustration in the previous section.
4.
Reconnect all the required cables to
the motherboard. See section “2.6
Cable connections” for details.
5.
Reinstall all the devices that you
have previously removed.