Asus RS120-E4 User Guide - Page 121
Adding or viewing a RAID configuration
UPC - 610839641819
View all Asus RS120-E4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 121 highlights
6.2.3 Adding or viewing a RAID configuration You can add a new RAID configuration or view an existing configuration using the View/Add Configuration command. Adding a new RAID configuration To add a new RAID configuration: 1. From the Management Menu, highlight Configure, then press . 2. Use the arrow keys to select View/Add Configuration, then press . 3. The ARRAY SELECTION MENU displays the available drives connected to the SATA ports. Select the drive(s) you want to include in the RAID set, then press . When selected, the drive indicator changes from READY to ONLIN A[X]-[Y], where X is the array number, and Y is the drive number. The information of the selected hard disk drive displays at the bottom of the screen. ASUS RS120-E4/PA4 6-15
ASUS RS120-E4/PA4
6-15
6.2.3
Adding or viewing a RAID configuration
You can add a new RAID configuration or view an existing configuration using the
View/Add Configuration
command.
Adding a new RAID configuration
To add a new RAID configuration:
1.
From the Management Menu, highlight
Configure
, then press <Enter>.
2.
Use the arrow keys to select
View/Add Configuration
, then press <Enter>.
3.
The
ARRAY SELECTION MENU
displays the available drives connected
to the SATA ports. Select the drive(s) you want to include in the RAID set,
then press <SpaceBar>. When selected, the drive indicator changes from
READY
to
ONLIN A[X]-[Y], where X is the array number, and Y is the drive
number.
The information of the selected hard disk drive displays at the bottom of the
screen.