Asus RS120-E4 User Guide - Page 53
USB device wake-up 3-pin USBPW12, USBPW34, Keyboard power 3-pin KBPWR1
UPC - 610839641819
View all Asus RS120-E4 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
2. USB device wake-up (3-pin USBPW12, USBPW34) Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices. Set to +5VSB to wake up from S3 and S4 sleep modes (no power to CPU, DRAM in slow refresh, power supply in reduced power mode). ® P5M2-R USBPW12 1 2 +5V (Default) 2 3 +5VSB P5M2-R.USB.device.wake-up USBPW34 1 2 +5V (Default) 2 3 +5VSB • The USB device wake-up feature requires a power supply that can provide 500mA on the +5VSB lead for each USB port; otherwise, the system would not power up. • The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal condition or in sleep mode. 3. Keyboard power (3-pin KBPWR1) This jumper allows you to enable or disable the keyboard wake-up feature. Set this jumper to pins 2-3 (+5VSB) to wake up the computer when you press a key on the keyboard (the default is the Space Bar). This feature requires an ATX power supply that can supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS. ® P5M2-R KBPWR1 1 2 +5V (Default) 2 3 +5VSB P5M2-R.Keyboard.power.setting ASUS RS120-E4/PA4 4-