Asus TS100-E4 PI2 E2791 TS100-E4/PI2 User's Manual - Page 119
Adding or viewing a RAID configuration
View all Asus TS100-E4 PI2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
5.3.2 Adding or viewing a RAID configuration You can add a new RAID configuration or view an existing configuration using the View/Add Configuration command. Adding a new RAID configuration To add a new RAID configuration: 1. From the Management Menu, highlight Configure, then press . 2. Use the arrow keys to select View/Add Configuration, then press . 3. The ARRAY SELECTION MENU displays the available drives connected to the SATA ports. Select the drive(s) you want to include in the RAID set, then press . When selected, the drive indicator changes from READY to ONLIN A[X]-[Y], where X is the array number, and Y is The information of the selected hard disk drive displays at the bottom of the screen. ASUS TS100-E4/PI2 5-19
ASUS TS100-E4/PI2
5-19
5.3.2 Adding or viewing a RAID configuration
You can add a new RAID configuration or view an existing configuration using
the
View/Add Configuration
command.
Adding a new RAID configuration
To add a new RAID configuration:
1. From the Management Menu, highlight
Configure
, then press <Enter>.
2. Use the arrow keys to select
View/Add Configuration
, then press <En-
ter>.
3. The
ARRAY SELECTION MENU displays the available drives connected
to the SATA ports. Select the drive(s) you want to include in the RAID
set, then press <SpaceBar>. When selected, the drive indicator changes
from
READY to
ONLIN A[X]-[Y], where X is the array number, and Y is
The information of the selected hard disk drive displays at the bottom of
the screen.