Asus TS100-E4 PI2 E2791 TS100-E4/PI2 User's Manual - Page 36
Follow the same procedures
View all Asus TS100-E4 PI2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
5 6 5. Connect a 40-pin IDE cable (from the first optical drive) to the IDE connector on the drive. 6. Connect a 4-pin power plug from the power supply unit to the drive power connector. 7 8 7. Remove the front panel bay cover opposite the drive bay you used by pressing the hooks inward. Follow the same procedures when installing additional optical drives. 8. Reinstall the front panel and side covers when done. 2-18 Chapter 2: Hardware setup
Chapter 2:
Hardware setup
2-18
5. Connect a 40-pin IDE cable
(from the first optical drive) to
the IDE connector on the drive.
6. Connect a 4-pin power plug
from the power supply unit to
the drive power connector.
6
5
7. Remove the front panel bay
cover opposite the drive bay
you used by pressing the hooks
inward.
Follow the same procedures
when installing additional optical
drives.
8
7
8. Reinstall the front panel and
side covers when done.