Asus TS100-E4 PI2 E2791 TS100-E4/PI2 User's Manual - Page 48
P5M2-M/C_TS100-E4 FM CPU Setting
View all Asus TS100-E4 PI2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
2. CPU fan pin selection (3-pin FM_CPU1, FM_CPU2) These jumpers allow you to connect either a 3-pin or a 4-pin fan cable plug to the CPU fan connectors (CPU_FAN1, CPU_FAN2). Set these jumpers to pins 1-2 if you are using a 3-pin fan cable plug, or to pins 2‑3 if you are using a 4-pin plug. FM_CPU1 12 23 P5M2-M/C_TS100-E4 3-pin fan (Default) 4-pin fan FM_CPU2 ® 1 2 3-pin fan (Default) P5M2-M/C_TS100-E4 FM CPU Setting 2 3 4-pin fan 3. USB device wake-up (3-pin USBPW12, USBPW34) Set these jumpers to +5V to wake up the computer from S1 sleep mode (CPU stopped, DRAM refreshed, system running in low power mode) using the connected USB devices. Set to +5VSB to wake up from S4 sleep mode (no power to CPU, DRAM in slow refresh, power supply in reduced power mode). P5M2-M/C_TS100-E4 USBPW12 12 23 +5V (Default) +5VSB USBPW34 ® 12 23 +5V (Default) +5VSB P5M2-M/C_TS100-E4 USB Device Wake-Up • The USB device wake-up feature requires a power supply that can provide 500mA on the +5VSB lead for each USB port; otherwise, the system would not power up. • If you are using Windows 2000, you need to install Service Pack 4 to wake up the system from S4 sleep mode. • The total current consumed must NOT exceed the power supply capability (+5VSB) whether under normal condition or in sleep mode. 3- Chapter 3: Motherboard Information