Asus TS100-E4 PI2 E2791 TS100-E4/PI2 User's Manual - Page 37
Installing expansion cards
View all Asus TS100-E4 PI2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
2.7 Installing expansion cards The system comes with two PCI slots, one PCI Express x8 (x8 link) slot, and one PCI Express x1 (x4 link) slot. Make sure to unplug the power supply before installing or removing an expansion card(s). Failure to do so may cause severe damage to both the motherboard and the components. To install an expansion card: 1. Before installing the expansion card, read the documentation that came with it and make the necessary hardware settings for the card. 2. Lay the system on its side on a flat, stable surface. 3. Release the screw as show. 4. Then remove the hook metal bracket under all slots of metal bracket. 5. Then remove the metal bracket opposite the slot that you intend to use. Keep the metal bracket screw for later use. 6. Align the card connector with the slot, then press firmly until the card is completely seated on the slot. ASUS TS100-E4/PI2 2-19