Behringer BTR2000 Manual - Page 11
Using a Footswitch, Application Examples
View all Behringer BTR2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
11 RACKTUNER BTR2000 User Manual 6. Using a Footswitch Single footswitches can be plugged into the MUTE and SELECT connectors (not included). ◊ Use only non-latching footswitches! The BEHRINGER DUAL A/B SWITCH AB200 is ideally suited. The following functions are available with the footswitch: MUTE SELECT TUNER To mute MAIN output Toggle between INPUT1 and INPUT2/MIC inputs Table 6.1: Options overview If you have a double footswitch such as the BEHRINGER FS112, it must be connected to the SELECT connector! Both functions (MUTE and SELECT) are then transmitted over a stereo connection and can be controlled using the two buttons. 7. Application Examples The following sample configurations should give you an idea how the BTR2000 can be integrated in a more or less complex environment. If you have only one amplifier available, the setup shown in figure 7.1 is recommended. METRONOME To mute MAIN output Activate/deactivate metronome AC POWER INPUT MODEL BTR2000 CONCEIVED AND DESIGNED BY BEHRINGER GERMANY. MADE IN CHINA CAUTION REPLACE FUSE WITH SAME FUSE TYPE AND RATING. AT T EN T ION UTILISER UN FUSIBLE DE RECHANGE DE MEME TYPE ET CALIBRE. RACKTUNER BTR2000 CAUTION RISK OF ELECTRIC SHOCK! DO NOT OPEN! ATTENTION RISQUE DE CHOC ELECTRIQUE! NE PAS OUVRIR! CAUTION TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. MUTE SELECT SOUND MAIN (RING = MUTE) FOOTSWITCH OUTPUT MAIN 2 1 INPUT INPUT INPUT 2 V-TONE GMX212 Fig. 7.1: BTR2000 configuration with only one amp