Behringer BTR2000 Manual - Page 13
Specifications
View all Behringer BTR2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
13 RACKTUNER BTR2000 User Manual 8.3 Footswitch wiring If a double footswitch is plugged into the SELECT connector on the back of the BTR2000, the MUTE function is transmitted on the ring and SELECT is transmitted on the tip. Stereo plug for non-latching footswitch strain relief clamp sleeve ring tip sleeve ground/shield ring mute tip select The non-latching footswitch brie y connects either the sleeve and the ring or the sleeve and and the tip. Fig. 8.2: 1/4" TRS connector plug of a double footswitch ◊ Always make sure that only technically qualified people install and operate your RACKTUNER. During and after the installation, all those handling the equipment need to be sufficiently grounded in order to avoid the potentially damaging electrostatic discharge or similar damage that could have a permanent adverse effect on your equipment. 9. Specifications Audio Connectors INPUT 1 Input impedance INPUT 2 Input impedance SOUND Output impedance MAIN Output impedance 1/4" TS connector on the front and back 1 MΩ, relay hard bypass 1/4" TS connector 1 MΩ, buffered 1/4" TS connector 4.5 kΩ 1/4" TS connector 500 Ω Connector for Footswitch MUTE SELECT 1/4" TS connector 1/4" TRS connector Tuner Scale Frequency range Reference tone for manual or automatic calibration Display scale Display resolution 12 equally tempered notes 27.5 Hz to 4186 Hz 440 Hz ± 12 Hz ± 50 Cent (± 0.5 half steps) ± 1 cent, ± 5 cents Metronome Tempo range 30 BPM - 240 BPM Racklight Illumination 4 x LED, 5 mm, white Power Supply Power range USA/Canada China Europe/U.K./Australia Japan Power consumption 120 V~, 60 Hz 220 V~, 50 Hz 240 V~, 50 Hz 100 V~, 50 - 60 Hz 9 W Dimensions/Weight Dimensions (H x W x D) Weight approx. 44 x 483 x 105 mm (1.7 x 19 x 4.1") approx. 1.2 kg (2.6 lbs) BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or shown.