Behringer EUROCOM SPL3220 Quick Start Guide - Page 12
Specifications, Especificaciones técnicas
View all Behringer EUROCOM SPL3220 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
22 EUROCOM SPL3220 Specifications Audio Input Type Impedance Nominal operating level Max. input level CMR @ 1 kHz Audio Output Type Impedance Max. output level Bandwidth THD @ +4 dBu Noise & hum, unity gain Crosstalk @ 20 kHz CMR @ 1 kHz Crossover Section Type Corner frequencies Compressor/Leveler Section Type Threshold control Leveler control Ratio control Output control Peak Limiter Section Type Level control Band limit LEDs Function Switches In/Out switch Indicators Gain reduction meters In/Out level meters LED indicator for each function switch Power Supply Mains voltage Power consumption Fuse Mains connection Physical Dimensions (W x D x H) Weight RF-filtered, servo-balanced input 42 kΩ balanced, 21 kΩ unbalanced -10 dBV / +4 dBu, switchable +22 dBu, balanced and unbalanced 50 dB typical Servo-balanced output stage 100 Ω, balanced, 50 Ω unbalanced +22 dBu balanced and unbalanced 10 Hz to 100 kHz, +0 / -3 dB 0.03% typical > 83 dBu (20 Hz to 20 kHz, unweighted) -70 dB typical 50 dB typical 24 dB Butterworth filter Switchable (Music 500 Hz / Speech 2 kHz) Multiband IKA compressor -40 to +20 dB OFF to 6 1:1 to 6:1 -20 to +20 dB Multiband IGC Peak Limiter 0 to +20 dB Low and High band Peak LED limiter indicators DC-controlled "hard-bypass" relay 1/2/4/6/10/15/20/30 dB -30/-20/-10/-5/0/+5/+10/+15 dB 100 - 240 V~ 50/60 Hz 10 W T1.25 A H 250 V~ Standard IEC receptacle 17.5 x 7.6 x 2.0" / 445 x 192 x 50 mm 4.0 lbs / 1.8 kg Especificaciones técnicas Entrada Audio Tipo Impedancia Nivel operativo nominal Nivel de entrada máximo CMR @ 1 kHz Salida Audio Tipo Impedancia Nivel de salida máximo Ancho de banda THD @ +4 dBu Ruido y zumbidos, ganancia unitaria Cruce de señal @ 20 kHz CMR @ 1 kHz Sección de Crossover Tipo Frecuencias límite Sección de Compresor/Nivelador Tipo Control Threshold Control Leveler Control Ratio Control Output Sección de Limitador de Picos Tipo Control Level Pilotos de limitación de banda Interruptores de Función Interruptor In/Out Indicadores Medidores de reducción de ganancia Medidores de nivel de entrada/salida Piloto para cada interruptor de función Alimentación Voltaje, amperaje Consumo Fusible Conector Datos físicos Dimensiones (L x P x A) Peso Entrada servo-balanceada y con filtro RF 42 kΩ balanceado, 21 kΩ no balanceado -10 dBV / +4 dBu, conmutable +22 dBu, balanceado y no balanceado 50 dB típico Etapa de salida servo-balanceada 100 Ω balanceado, 50 Ω no balanceado +22 dBu balanceado y no balanceado 10 Hz a 100 kHz, +0 / -3 dB 0,03% típico > 83 dBu (20 Hz a 20 kHz, sin medición) -70 dB típico 50 dB típico Filtro Butterworth 24 dB Conmutable (Music 500 Hz / Speech 2 kHz) Compresor IKA multibandas -40 a +20 dB OFF a 6 1:1 a 6:1 -20 a +20 dB Limitador de picos IGC multibandas 0 a +20 dB Pilotos de limitador de picos de banda de agudos y graves Relé "hard-bypass" controlado por CC 1/2/4/6/10/15/20/30 dB -30/-20/-10/-5/0/+5/+10/+15 dB 100 - 240 V~ 50/60 Hz 10 W T1,25 A H 250 V~ Receptáculo IEC standard 445 x 192 x 50 mm 1,8 kg Quick Start Guide 23